Reactor Pressure vessel Tank Stainless steel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Maximum speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain ITNC 530 Djdpozhn Ayefx Ac Hsci Spindle operating hours: 14,000 h Coolant supply: 20 bar Input voltage: 29 V Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,000 mm Total weight: 15,000 kg EQUIPMENT Documentation/Manual Speed adjustable in steps Chip conveyor Coolant filtration system Swinging operation, mountable wall Handwheel Measuring probe Tool changer

Year of construction: 1986, condition: not inspected (used), 6 head rotating vacuum capper rebuild 2017 as-is Djdjf Rk Agopfx Ac Heci or tested and adjusted to customer needs.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm L/D ratio: 32D MACHINE DETAILS Motor power: 52 kW (DC) Control system: analog, contactor-controlled system EQUIPMENT Synchronous motor Dcsdpfjzd Scpex Ac Hoi Degassing Vacuum pump

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 05 17 1994, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller model: Heidenhain TNC 415, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Dsdpfx Acszha Ino Hsci Travel range X-axis: 2,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,250 mm B-axis: 360° Table size: 1,600 x 1,800 mm MACHINE DETAILS Control system: Heidenhain TNC 415 Tool holder: SK 50 ATC: 60 Note: Angles are not included in the scope of delivery. The machine has already been disassembled.

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) Dcsdpfx Aceilqvrj Hji - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Dsdpfx Acszdtxfs Heci Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Dcsdpfx Acszdttpo Hji Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 EQUIPMENT Tool changer

Year of construction: 2025, condition: new, I have a packaging machine for sale for bulk goods such as flour, sugar, powdered milk, spices, and much more. The packaging capacity is 5-30kg in paper or plastic bags. the price 13 500 EUR including 1- screw feeder 2- packing machine 5-30kg Dcedpfx Acjxfapts Hji - Power supply: 2.5kW 400V 50Hz - Packaging accuracy: +/- 1% - Packaging speed: 200-400 bags per hour (at 10kg) - Set weight: 190kg - Set dimensions: 1000x850x2300mm For highly dusty products, an additional dust extractor can be connected. Price 13 500 EUR - EXW terms INVITE TO INQUIRE

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Dsdpfxozd Tcdj Ac Hjci Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101.116, Year of construction: 2001, operating hours: 2,133 h, load capacity: 9,000 kg, lifting height: 3,000 mm, free lift: 200 mm, load center: 600 mm, mast type: duplex, TECHNICAL DETAILS Load capacity: 9,000 kg (up to 10 tons can be lifted temporarily) Lifting height: 3,000 mm Free lift: 200 mm Load center: 600 mm Dodpfx Aozd Sg Ujc Heci Overall height: 2,480 mm Fork length: 1,650 mm Fork width: 150 mm Fork thickness: 70 mm Turning radius (outer): 2,900 mm MACHINE DETAILS Fuel type: Gas Mast type: Duplex Engine manufacturer: Perkins Transmission type: Hydrostatic Power: 55 kW (74.78 hp) Engine speed: 2,300 rpm Front tire type: Solid rubber tires (non-marking) Rear tire type: Solid rubber tires (non-marking) Hydraulic tank: 120 liters Operating voltage: 12 V Noise level: approx. 85 dB(A) Dimensions & Weight Length (to backrest): 3,050 mm Width: 1,550 mm Wheelbase: 1,950 mm Unladen weight: 14,500 kg Max. travel speed: 10 km/h Gradeability: 15% Operating hours: 2,133 h EQUIPMENT Trailer coupling Lighting CE marking Complete documentation including spare parts list Cabin Pallet forks Side shifter UVV (German accident prevention regulations) Hydraulically adjustable cabin Swivel column with telescopic boom Integrated winch AM/FM radio 3 switchable cameras with monitor Digital weighing system Pfreundt WK33 Joystick control Comfort seat Excellent all-around visibility

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Dcjdpfx Acerzbfce Hsi

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91045841, Year of construction: 2007, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, battery voltage: 48 V, TECHNICAL DETAILS Load capacity: 2,000 kg Load center: 600 mm MACHINE DETAILS Mast model: ZG 560DZ Drive type: Electric drive Battery voltage: 48 V Drive power: 6.0 kW Unladen weight without battery: 3,392 kg Battery weight: 890–984 kg EQUIPMENT Dodozd Rukspfx Ac Heci Driver's seat Sensitive hydraulics Very maneuverable Ideal for high-bay warehouses Robust Jungheinrich technology Precise control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,976 h, load capacity: 2,700 kg, lifting height: 8,000 mm, mast type: triplex, TECHNICAL DETAILS Lifting height: 8,000 mm Load capacity: 2,700 kg Load capacity at 8,000 mm lifting height: 2,200 kg at a 400 mm load center 1,900 kg at a 500 mm load center 1,700 kg at a 600 mm load center MACHINE DETAILS Mast type: Triplex Mast model: TXH8000 Electric drive: 48 V Battery weight: 1,100–1,200 kg Weight without battery: approx. 3,560 kg Operating hours: 4,976 h Dcodozd Rr Nopfx Ac Hji EQUIPMENT Electric reach truck 4-way system for long loads Comfort seat Joystick control Suitable for high-rack warehouses Toyota quality vehicle Direction of travel: forward / backward / sideways Stand-on forklift Hydraulic fork adjustment 360° steering

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. Djdpfjq Nf Uwox Ac Hoci 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Dcedpfezd Rqlox Ac Hsi Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle