Extrusion Screen Changers - Continuous

Kreyenborg K-SWE

Year of construction: 2000, condition: refurbished (used), machine/vehicle number: 19018, KREYENBORG DOUBLE SCREEN CHANGER K-SWE-101/121/RS Year of construction 07.2000 Iasdpeufgfgjfx Ahvep With accessories: Various perforated disks, sieves etc. The screen changer was overhauled by NORDSON General for € 18,000 Application: 2-layer extrusion or single operation

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Iajdpfocqvhwjx Ahvep Location: From stock 54634 Bitburg - available immediately -

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump Iajdpfx Ahji Dtb Usvsp ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit Iaedpfx Ahjd Sg I Ijvop pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system Iaedpfxsiyyf Is Ahvjp TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger Ijdpfx Ahjh Eyd Rsveap BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Iaodog A Hcuspfx Ahvjp

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Iajdpfsr Hrqrox Ahvsp Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW Iedpfxjrg Ebcj Ahvoap - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Condition: refurbished (used), Our Edwards GV250 pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances Ijdpfx Ahjfq Rgiovsap be fitted with new wear parts be available at short notice included one-year warranty