Cutter head with deflector Krebs

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Gbsdpfozf Ircex Ad Iop Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: new, Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Gbsdpodzttasfx Ad Ijp Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. Gjdpfozf Id Ssx Ad Isbp External reference: 8570

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 Gbsdpfxozf Ibws Ad Ijp MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: new, bore capacity in steel (diameter) 32 mm throat 257 mm bore stroke 115 mm boring spindle MK 4 Godpfx Adofv H H Uj Isbp boring chuck 16 mm bore depth 120 mm table surface area 475 x 425 mm column diameter 92 mm total power requirement 1,1 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Gedpfszf Ibdox Ad Isbp Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Max. cutting height: 430 mm EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at its destination. Gbedpfszf H Szsx Ad Ijp External Reference: 8580

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0145_1375, Exhibit immediately available: Gbedsh Ey N Ujpfx Ad Isp New Kaeser Aircenter SK 16 - 8 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Year: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 9 KW Delivery quantity 7,5 bar: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW Gbodpfxozf H R Re Ad Isp EQUIPMENT Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working spindle length: 100 mm Gbjdpfezf H Nyjx Ad Ijp MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. Gbodpfx Asv D Uz Ejd Iop - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Gbedszf H Nmopfx Ad Isp External reference: 8546

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Godpozf H Iiofx Ad Iobp External reference: 8577

Condition: new, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Extension table: 330 mm x 330 mm Veneer sanding attachment: yes Gbodpfx Aogr Ufhjd Iop Oscillation: yes Sanding unit swivels: yes Dust extraction port: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Weight: 290 kg

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Godjzf H Hrjpfx Ad Isbp Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572