Eccentric press

MÜLLER EXP 300 R

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- Rcodpjy H Irusfx Amysd - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching Redpox D E Dysfx Amyecd • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm Rjdpfx Aofn Aqlemyscd total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Rjdpfew Rqwtex Amyecd

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Send us your inquiry today! Rsdsg Rn Avepfx Amyjcd

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 Rodpfxjt Drkys Amyjcd -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: refurbished (used), ECCENTRIC PRESS SGP Rcsdpjhqqnzofx Amyjd TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication Rcedpfxedzp Tco Amysd - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Redpfeu Awalox Amyocd Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min sheet width:180 mm stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER voltage:380 V Rcsdpocxxt Tefx Amyod dimensions of the machine ca.:1,85 x 2,70 x 3,00 m double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control panel