Reinforcing steel shears

L & L FM1001

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Lrjdpfxex H Rmus Ahker Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, Ledpeylbpvefx Ahkerr table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: Lodpswrm Dtsfx Ahksrr >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 2x available! x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Immediately ready for use Lrjdpfx Aep S Schohker Free loading, transport no problem.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Lsdpfx Ahjyu Nqmekerr Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm Lsdpevf I Diefx Ahkjrr - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller Lrjdpfx Ahev Iq Ezskjr MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Center distance ----- 1000 mm Center height ----- 230 mm Swinging diameter ----- 460 mm Main spindle bore ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY-DUTY DESIGN - WEIGHT 2400 KG Ljdpfx Ahoga Tz Uskjrr INCLUDES * 3-axis digital read-out system, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool holders * 3-jaw chuck 250 mm * 4-jaw chuck 320 mm * Faceplate 350 mm * Fixed and follower steady rest * LED work light and coolant system * Electric brake CE * Toolbox with various tools

Condition: new, Center distance ----- 1500 mm Center height ----- 230 mm Turning diameter ----- 460 mm Main spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Lrodpjga Tv Eofx Ahkjr Weight ----- 2220 kg INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 tool blocks * 3-jaw chuck, 250 mm * 4-jaw chuck, 320 mm * Faceplate, 350 mm * Stationary and follow rest * LED work light and coolant system * Electric brake * Foot brake * Box with various tools

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z 800 x 450 x 510mm, table size 1000 x 450 mm, table load 600KGS, spindle taper BT40, spindle speed 12,000rpm, Ledpfx Aozbhv Iohksrr 30 station ATC, spindle power 18.5/11Kw, Through spindle coolant, Siemens 828D control