Injection molding machine

KraussMaffei KM 1100-12000 MX

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Robot: Wittmann Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in 3 USB ports. Plasticizing unit: Complete abrasion-resistant plasticizing unit for thermoplastics, screw diameter 120 mm, with non-return valve and open nozzle. Technical data Clamping unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (H × V): 2,210 × 1,910 mm Tie bar spacing (H × V): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Mold height (min–max): 600 – 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Gedpfjx Tgbhex Ahvjip Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and hydraulic equipment Pump motor rated power: 132 kW Installed heater capacity: 82 kW Number of barrel heating zones: 7 Number of dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions and weight Net weight with control cabinet: 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Year of construction: 2020, condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Giodpfx Asiryf Sohvsp Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Gedpfx Aju R R Acohvjip Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90° round 320 m Gijdpfxsim Ildo Ahvep - flat 320 x 320 mm - Automatic material feeder - saw blade dimension 5095 x 34 x 1,1 mm - cutting speed 10 to 120 m/min - hydr. lifting - lowering of the saw frame - upper stroke limitation of the saw frame - cutting pressure infinitely variable - hydr. material vice - chip conveyor screw - coolant device - discharge roller conveyor 2500 mm - drive 400 V / 4,0 kW - space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm Gijdpfxotqqrfj Ahvsp cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: FANUC, controller model: Series-31i, spindle speed (max.): 10,000 rpm, This 5-axis FANUC ROBODRILL α-D21LiB5 was manufactured in 2018. Ideal for precision machining, this vertical machining centre ensures reliable performance. Consider the opportunity to buy this FANUC ROBODRILL α-D21LiB5 vertical machining centre. Contact us for more information. Additional equipment • Oil Mist Extractor Gisdpfxoyaqfio Ahvep Machine Benefits Technical Machine Benefits • High torque spindle drive • Versatile tool measurement and probing systems • Advanced control features for smooth operation and precise contour control • Comprehensive cooling and chip management systems • Spindle drive: bbt/bt 30, high torque • Two-axis rotary table: tsudakoma twa-160 with drives • Wireless tool measurement probe: metrol rc-k3e • Part probing system: metrol td1 • Tool magazine: 21 positions, bbt/bt 30 Extra Information Media Through-Spindle Coolant System: 25 bar Work Area Flushing System Coolant Tank Capacity: 250 liters Chip Tank Interface for Washdown Gun Connection Options included are rotary/tilting table, chip conveyor, high-pressure coolant pump, part probe, and oil mist extractor.

Condition: used, Year of construction: 1995, cutting diameter 260 mm saw band length 3830 x 27 x 0,9 mm cutting range flat 310 x 260 mm cutting range square 260 x 260 mm cutting speed stufenlos 19-110 m/min Giedpfx Ahswhqxmsvop feed length 750 mm multiple feeding length 6750 mm height of material-table 700 mm weight of the machine ca. 1,4 t dimensions ca. 2100x2300x1720/1300 mm incl. several band saw blades incl. chip conveyor

Condition: used, Year of construction: 2007, Fanuc Robodrill Alpha T21iEL 5-axis machine Year of manufacture: 2007 Control: Fanuc 31i Manual Guide Axis travels: Godpfx Aheyg Hl Eevjip -X: 700 mm -Y: 400 mm -Z: 330 mm -C: 360 degrees -B axis 4th and 5th axis: Tsudakoma TN130 rotary table Spindle: max. 24,000 rpm Spindle taper: BT30 Tool magazine: 21 positions -documentation -coolant tank with pump

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Gisdpfx Aov Tmzpshvjp Year 2006 screw di 30

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Gijdpjt Dpw Rsfx Ahvjp Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).