Band Saw - Automatic - Horizontal

KASTO SBA 260 AU

Condition: used, Year of construction: 1991, power: 3.5 kW (4.76 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 260 mm, total height: 1,720 mm, total length: 2,100 mm, total width: 2,300 mm, overall weight: 1,280 kg, table height: 700 mm, We are offering this used KASTO SBA 260 AU bandsaw, year of manufacture 1991. Model: SBA 260 AU Year: 1991 Cutting diameter: 260 mm Saw band dimensions: 3830 x 27 x 0.9 mm Cutting range (square): 260 x 260 mm Infinitely variable cutting speed: 19-110 m/min Feed length: 750 mm Multiple feed length: 6750 mm Material support height: 700 mm Dimensions approx. 2100 x 2300 x 1720 mm Rsdpfsy Eqavjx Acdecb Voltage/Frequency: 380 V / 50 Hz Connected load: 3.5 kW Connection fuse: 16 A Machine no.: 101 378 6006/86249 Weight approx.: 1280 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm Rcodpfx Acow Rkt Iedob centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: good (used), Year of construction: 1998, total height: 1,700 mm, total length: 2,100 mm, total width: 2,260 mm, overall weight: 1,300 kg, cutting range round steel at 90°: 260 mm, Automatic band saw, capacity Ø 260 mm, 90°-cut, cutting speed 17-110 m/min stepless, motor 2,3 kw 2-speed, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device, dimension 2260x2100x1700 mm, weight ca. 1300 kg Rodpfx Ajmxliwocdocb

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank - immediately available Rodpjv S Svvefx Acdocb

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH Rjdpfsh Rdwxox Acdscb *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system Rcedpfx Ajxup Rfjcdsb - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 2 Rcedew Efgaspfx Acdeb MAIN SPINDLE - Spindle nose : A2-5" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 195 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.001 [°] TRAVELS - Z stroke : 400 [mm] - X stroke : 150 [mm] - Rapid traverse rate : 36 [m/min] - Spindle / counter-spindle distance : 600 [mm] TURRET 1 - Number of positions : 24 - Number of motorized positions : 12 - X/Z stroke : 400/150 [mm] - Y stroke : +/- 40 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.1 [kW] TURRET 2 - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3072X1974 [mm] - Machine height : 1799 [mm] - Machine weight : 6500 [kg] EQUIPMENT - CNC : Fanuc 0i-TF PLUS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor : DROITE LNS MH500 - Tool probe - Parts catcher - Parts conveying strip - Predisposition for barfeeder - Electric transformer

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal. Rcsdpfx Acsv U Ea Hedob

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Rcodpfsfmqqljx Acdsb Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Weight: 5.700 kgr

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m Rsdpfx Ajd Iipmscdjcb PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens