Chipper KLOCKNER HZM 1/400x100

KLOCKNER HZM 1/400x100

Condition: good (used), Well-maintained horizontal creel. Passage 1000 mm. Stroke 800 mm. Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Kwedpsunhl Ujfx Ad Nst Can still be inspected in operation.

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Ksdjd H Sc Ejpfx Ad Nswt Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Kodpfx Adencft Uj Newt

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Ksdpfx Adsiwbfus Nowt Second flexible pusher: yes Panel Rotation Station: yes

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors Kwsdpfop T Twujx Ad Njt pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm Kodpec Tmygjfx Ad Nswt weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Kwedsvx Afnjpfx Ad Njt Opening side up to 3000 mm

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 175 kg, fuel type: diesel, tank capacity: 15 l, color: black, output current: 20 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 11 kW (14.96 HP), continuous power: 8.5 kW (11.56 HP), total length: 800 mm, total width: 700 mm, total height: 750 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with a power output of 8.5kW and 11kW. The Proton 10000 360 is characterized by Dual Power technology, thanks to which the user is able to obtain 80% power on a single-phase socket and 100% power on a three-phase socket. SHORT: Genset type: DUAL, Single-phase, Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 230/400V Rated power: 400V - 8,500 watts (10.6kVA) Maximum power up to 15 minutes - 11,000 watts (13.75 kVA) Rated power 230V - 6800 Watt Maximum power up to 15 minutes - 8800 Watt WEIGHT: Gross weight: 175 kg FUELING: 2.0 liters per hour (at 70% of maximum power) 1.7 liters per hour (at 40% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Ksdpfetq Ua Usx Ad Nswt Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 292F-D0 Fuel type - Diesel (Diesel) Engine type - High compression, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 667 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 2.0l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 200-CAVR-D Rated current (400V) - 20 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 87dB (measurement - 5m, open space) Fuel tank capacity - 15 liters Operating time on a full tank (Average) - 6 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 1 piece (16A), 2 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 70 cm Length - 80 cm Height - 75 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V), 1xC32 (for 230V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: excellent (used), Catalog number 6726 Kedpfx Adeignt Us Njwt TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Kjdpstk N Dksfx Ad Newt