4 rolls hydraulic bending

KK-Industries CY4R-HHS 300-20/20

Year of construction: 2002, condition: used, diameter 180 mm workpiece length 0 mm work piece width 1350 mm total power requirement 65 kW weight of the machine ca. 7.500 kg dimensions of the machine ca. m Ncsdpfx Adjt Hw Shj Njl

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: Ncodjvxbm Repfx Ad Nol L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: new, messurements (LxWxH): 3.600 x 1.120 x 1020weight approx.: 2.400total power requirements: 4prebending: 5sheet thickness: 6sheet length: 2030 Njdpfx Adjd Ab Hae Nscl

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Ncsdpfx Adswykcce Nol

Condition: new, bending length: 1600sheet length: 1600upper roll diameter: 140sheet thickness: 6 Ncodsd Ab Smopfx Ad Nel Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.580,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet length: 3100sheet thickness: 13prebending: 10total power requirements: 15weight approx.: 10messurements (LxWxH): 4,88x1,16x1,18 Illustration Similar Roller diameter (top/bottom): Ø270 mm Bending length: 3,100 mm Maximum sheet thickness for normal bending: 13 mm Maximum sheet thickness for prebending: 10 mm Prebending / bending radius: 8 mm / 10 mm (radius calculated as Ød × 1.5) CE Standard Variable speed Control unit – 7 Touch Screen Conical bending Induction hardened rolls Side rolls positioning via electronically synchronized PLC Bottom roll rigid mechanically synchronized Safety mechanism for welding on the machine Stress-relieved steel construction body Rolls seated with bearings Top roll hydraulic opening Top and bottom rolls driven by hydraulic motor and planetary gearbox Electrical and hydraulic overload protection Hydraulic pressure adjustable bottom rolls Nodod Ab H Eopfx Ad Necl

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / Nedpfsvtgn Nsx Ad Nscl backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Nsdpfx Aor H Haved Necl Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Height:1400 mm Weight:9000 kg

Condition: new, Ostas 4-roll round bending machine 4R OHS 2070 x 220 Hydraulic side roller infeed Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Roller length : 2000 mm Top roller diameter : 220 mm Side roller diameter : 180 mm Total motor power : 4+3 KW Weight : 4900 kg Dimensions (mm) : 4050 x 1550 x 1470 (L x W x H) Performance data bending: 11 mm with smallest inner diameter (5 x top roll) 9 mm with smallest inner diameter (1.5 x top roller) Nsdpotvn D Tofx Ad Nscl Bending performance data: 9 mm with smallest inside diameter ( 5 x top roller ) 7 mm for the smallest inside diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 structural steel ) Special accessories installed: Infinitely variable rolling speed: NC control:

Condition: good (used), three-phase motor, electric motor Ncjdped E Tfrjfx Ad Nsl -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg