3 rolls asymmetrical bending

DURMA MRB-S 2006

Condition: new, Year of construction: 2024, neu 2024 9739 prompt, Zwischenverkauf v Türkei 22300 € Dledowirurspfx Ab Tja 428.16 € 1 1 2030 mm 6 mm 6 mm 5 mm 170 mm 4 kW 3600 mm 1020 mm 1120 mm 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: good (used), turning diameter: 5,000 mm, travel distance Z-axis: 2,000 mm, turning length: 2,500 mm, The machine is in good technical condition, fully functional, modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm and a clamping plate diameter of 2500 mm. The workpiece weight is 40 tons and the height is 2000 mm. Dsdpfxov Dkyko Ab Tjla

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Dedpfx Absftdh Is Tsla Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement Djdod E A I Iopfx Ab Tola - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Dljdpsg Eglpefx Ab Tja Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Dsdpfx Aewl Ag Dob Tjla Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm Dljdped D D Hlsfx Ab Tja height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm inclination up to 135 hand and foot remote control with speed indicator very robust

Year of construction: 2004, condition: used, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 30,000 liter double-walled storage tank for the storage of diesel, with a new diesel dispenser incl data collection. Nominal capacity 30 cbm piece 1 used but overhauled, that means the tank is cleaned, refurbished, primed and painted Color equipment paint RAL ; but you can always bring your own color wishes. The plant is primed and is still painted . Material steel in steel, material S235JRG2 Documents Manufacturer certificate/test certificate according to DIN 6616 D/2 and type plate Piece 1 dipstick Piece 1 venting spigot Piece 1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight with filled up leak liquid Piece 1 ladder piece 1 suction line Shape cylindrical storage tank with feet/console tank mass length approx. 9.990 mm diameter approx. 2.000 mm Weight approx. 6.000 kg Storage above ground Of course you can also design your tank system! Dodpfx Aboc Nktbe Tola All our installations are extensively checked and inspected in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. All our tank installations can also be offered without diesel pump. Top on offer . Liquid fertilizer - AHL tank plants in the size of 10.000-100.000 liters. Water tank fire water tank in the offer . Price/ Shipping The price for the tank station is valid ex location Warstein , free loaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time = immediately You will receive an invoice with VAT. In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG) we can professionally empty, clean, dismantle and transport them away. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Dedpfx Ajwntqxeb Tola Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Dlsdpfxovr E Ede Ab Tea