3 rolls asymmetrical bending

KK-Industries C 46-10/0.8 with motor

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Nlodpsiq Hxvjfx Ad Ssc Travel speeds: Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Condition: new, 3-Roll Round Bending Machine, Ostas ORM 1270 x 140 Technical specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 1270 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness for pre-bending 4.0 mm Roll length 1270 mm Roll diameter 140 mm Weight 1400 kg Nlodofpmz Hjpfx Ad Sjc Dimensions L-W-H 2500 x 800 x 1100 mm Motor: 2.2 kW Equipment: Top and bottom rolls driven by electric motor Top roll can be swiveled out Conical bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking

Condition: new, Year of construction: 2025, curl forming machine 2,05m New! Direct from the manufacturer! Width: 2050 mm Max. Sheet thickness: 0.65 mm for Rm 400 MPa Shaft diameter: 16 mm Njdecg Tn Nopfx Ad Solc Pipe diameter 31.8 / 3.6 Weight: 15 kg We are looking forward to your contact!

Condition: new, NEW OKIO-M5 Grinding Robot Eccentric sander and force sensor Axes: 6 Nljdpfx Adetr T R Ao Sec Payload: 5 kg Reach: 922 mm

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Njdsfz A Ilepfx Ad Sslc Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: used, working width: 1020 mm Nlsdpfx Asda I Itsd Soc metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm

Condition: new, roller diameter: 140 mm, - Capacity 1050 x 6 mm - Electrically adjustable rear roller - Conical roller - Swiveling top roller - Brake motor - Emergency stop Nedpfxjpwgdye Ad Sslc - Documentation - 400V

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Nedpfxjg I H Npe Ad Selc Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: excellent (used), Year of construction: 2006, Bihler RM 40E stamping and bending machine Compact machine system for the production of stamped and bent parts from strip and wire. Nledpfx Adjg Inzkj Sec Quick tool clamping system User-friendly P CNC 4E machine and process control Compatibility with RM 35, RM40, and RM4 tools Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Type: RM 40E No. 27907 Year of manufacture: 2006 1x 184-01-0022.0 Basic machine RM 40 including central lubrication and pneumatic system including P-CNC 4E control according to installation plan 184-00-0085.3 including tool: 484 0027 2x 142-04-0347.0 Wide slides (items A9 and A16) 1x 142-55-0007.0 Angle lever unit with right lever (item A7) Without feeder, press, and center punch including light barrier for personnel protection Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, Drilling capacity, cast iron / steel ----- 45 / 40 mm Tapping capacity, cast iron / steel ----- 24 / 20 mm Nledpsga T H Defx Ad Soc Motor ----- 1.5 kW Speed range ----- 50 ~ 1450 rpm Spindle stroke ----- 180 mm Spindle taper ----- MK4 Automatic spindle feed ----- 0.1 - 0.2 mm/rev Drilling table ----- 560 x 560 mm Base ----- 730 x 500 mm Overhang ----- 350 mm Column diameter ----- 150 mm Maximum distance, spindle - table ----- 770 mm Maximum distance, spindle - base ----- 1210 mm Weight ----- 600 KG INCLUDED * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor * CE plug * Case with various tools