Vertical machining center

Kitamura Mycenter-3Xi

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x Ijdpfx Aqjw E I Itsuoau Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: used, Year of construction: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine Model FS 50 SA Grinding area 500x250x375mm, Vertical automatic with fine-pole electro-magnetic chuck, Grinding wheel diameter 300x50x76.2mm, with paper band filter system, with manual dresser on top. various wheels and flanges Weight: approx. 2400 kg Iasdpfx Aqswq Nc Nsueu Space requirement approx. 2500x1800xHeight 2500mm Machine is located with us in 71334 Waiblingen-Beinstein and can of course also be inspected. Please contact us.

Condition: used, Year of construction: 2013, A 4-axis CNC machining center Spinner is available. Travel X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18m/min, rapid traverse Z: 15m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10000rpm, power: 22kW, tool holder: SK40, tool positions: 24, weight: approx. 8000kg. Documentation available. On-site inspection is possible. Iaedpfxjwqd R Uj Aquou

Condition: excellent (used), Year of construction: 2004, pressing force: 400 t, stroke length: 680 mm, working width: 4,100 mm, Used, Very Clean high quality Bystronic 400ton x 4metre Cnc Hydraulic Press Brake for sale Very clean 4metre cnc pressbrake for sale – Bending / Folding machine down stroke pressbrake for sale With Extended daylight and stroke Make= Bystronic Iaodjv Dw Syspfx Aquju Model = PR10 400x4100 PR400 Bed Length 4100mm / 4.1metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 x2 Front powered sheet followers / lifting aids Hydraulic tool clamping CNC Hydraulic Press 400 Tonne Capacity Swiss made Cybelec Controller – MoEva12 Multiple Forming Tools Tool stacking system included Full Working Order and fully serviced with Bystronic UK Max closing speed 200 mm/s Complete with a good selection of tooling

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Iedpfx Aqsuyx Hzsusau

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form Iodouq Nfhopfx Aqujau MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: Iedeifn N Nspfx Aqusau - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) Iedpfox D Irmox Aqueau • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: used, Technical details: turning diameter: 626 mm turning length: 3000 mm Turning diameter: 600 mm Isdpfxjvgmimj Aquoau spindle bore: 100 mm spindle turning speed range: 2800 U/min weight of the machine ca.: 18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device *

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Ijdpovbcxtjfx Aqueau Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available