Cross cut fence with handwheel TNDG

TNDG

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Type Panda 400, M80, Iaodpfx Asw Iwaisg Iet 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm.

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Ijdpfjkvnumex Ag Ioat Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Iedpfjwwzudsx Ag Ioat Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t Iajdpfx Aob U Hwpsg Ijt dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm - Column diameter 160 mm - Lighting system Ijdpfx Aerckw Ieg Isat - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec Iasdpopgmufofx Ag Iot power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments Iaedpfxsqt Dmyj Ag Ist - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Four side planer scm compact xl - planing width 23cm - planing height 13cm Isdpfx Agjlat Hdj Ijat -electric lifting of the upper head and feed rollers - all spindles adjustable vertically and horizontally - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Machine in very good condition

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. Iodpfof Ekn Dsx Ag Ioat • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Iasdpfjfbbx Rjx Ag Ijt Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Best cutting performance even during face turning For stiffening the bed guide and for minimizing