Automatic punching press - double column

KAISER V 160 WR

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Iodpfx Apsw H Arvjcsig Center height: 410 mm Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table top; T-slot design can be freely selected) Ram size: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020.

Year of construction: 2004, condition: excellent (used), 3D coordinate measuring machine in a stand-alone design *Floor-mounted installation on steel feet *Height from floor to measuring plate: 600 mm Measuring range *X 3,200, Y 1,600, Z 1,800 [mm] Measurement uncertainty *30 + L/40, max. 60 [µm] at L = 3,000 mm Dynamics *3D traversing speed: 220 mm/sec *3D acceleration: 1000 mm/sec² Probing system *Renishaw PHS / alternatively PH10M Ijdohlqknopfx Apcoig *Renishaw TP20+2 modules Control system *Pantec Eagle Pro Wireless control unit *Handheld control unit HT400 Software POLYWORKS Inspector Optional technologies Probe changer MCR20 Probe changer ACR3 Optical scanner KREON or NIKON Supplier’s services Transport, commissioning, calibration, final acceptance Warranty 12 months, from the date of acceptance

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min Iijdoddhw Sspfx Apcjg engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. Iodpfeymampsx Apcjig A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm Iiedernq Ufepfx Apcsg year: 2001

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t Isdpfxoh Ra Spe Apcsig dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: used, Year of construction: 2001, machine/vehicle number: 150204, Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton Iiedpfevmfznex Apceg Standard configuration electrical overload protectionSIEMENS Control S72-hand control panel Extended machine accessories Automation Schleicher leveller (650 mm, max. 2.0 mm)Wanzke decoiler (max. 6t)Helmerding feeder (600 mm, 0,6 - 6,0 mm)

Condition: excellent (used), Year of construction: 2004, Kaiser Press KSTU 1600 - 15 - 3 PSR Iisdozlpm Ujpfx Apcsg Pressing force 1,600 kN Stroke rate 20 - 260 1/min Stroke height 20 - 120 mm Ram adjustment 120 mm Table area 1,250 x 900 mm Installation height 400 mm Includes ARKU strip processing line.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002570003, total height: 3,450 mm, ram adjustment: 80 mm, installation height: 270 mm, table height: 1,280 mm, total width: 1,700 mm, total length: 3,065 mm, drop-through hole in table: 210 mm, table length: 1,500 mm, table width: 750 mm, pressing force: 63 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 80 mm, clearance between the columns: 1,540 mm, working width: 1,500 mm, distance between side stands: 360 mm, distance between stands: 2,020 mm, overall weight: 17,000 kg, punching force: 63 t, RASTER punching system RST 630-1500 DH with soundproof enclosure and tool monitoring. The machine is in good condition. Stroke rate: 30 - 700 1/min. Operated in single-shift operation. The machine can be inspected under power. Price on request. Iodpfsyyppbsx Apcjig

Condition: new, Year of construction: 2026, functionality: fully functional, The Impuls Packaging Cobot is an intelligent automation system designed to move and position products efficiently and precisely. It handles the automatic picking, placement, and arrangement of products on pallets or within packaging units, ensuring a smooth and continuous production flow. Thanks to the integrated automation technology, various packing patterns and workflows can be stored directly in the system and recalled as needed. This enables the Cobot to be flexibly adapted to changing products and production requirements without any setup downtime. A range of gripper options is available for the Cobot, including vacuum grippers (either pneumatically operated or with an integrated vacuum motor) as well as specialized gripping systems for different applications. Together with our German partner in the Frankfurt region, we develop the optimal solution for your product to ensure precise, safe, and efficient handling. The system is operated via a user-friendly interface, allowing for easy setup and control without the need for programming skills. The Cobot’s compact design makes it easy to integrate into existing production lines while requiring very little floor space. Using our Cobot increases process reliability and reduces dependence on personnel bottlenecks due to illness or unfilled shifts, ensuring reliable and efficient production even with fluctuating staff availability. Typically, the Cobot pays for itself within the first year. System Features 1. 6-axis cobot robot for moving and placing products 2. Compact, space-saving design 3. Suitable for various pallet sizes 4. Multiple packing patterns can be stored and transferred to other systems Ijdpoyv H T Njfx Apcjig 5. Easy operation with a graphical user interface, suitable for unskilled staff 6. Low energy consumption, minimal operating costs 7. Available with a variety of gripper options Technical Parameters 1. Maximum product dimensions: L1200mm, W1200mm, H500mm 2. Maximum product weight: approx. 20kg (depending on gripper weight) 3. Packaging speed: 6–10 palletizing cycles/minute (depending on product and pallet size; up to 32 packs/minute possible with multi-pick) 4. Maximum stacking height: 2000mm (600mm additional lift), arm reach up to 1680mm 5. Pneumatic connection required for operation 6. Connection voltage: 3Ph. 380V 50Hz, DC 24V connection 7. Overall power: approx. 3 kW 8. Machine weight: approx. 600 kg 9. Machine dimensions: approx. 3450x1500x3500mm 10. Noise level: > 60 dB We offer different safety concepts for the Cobot: Safety fence: Physically separates the working area so entry into the operation zone is prevented during operation. Safety sensors: Sensors monitor the working area and automatically stop the Cobot as soon as a person or object enters the danger zone. We are happy to advise you on which concept is best suited to your production. When ordering, you can select one of the systems; the other can be supplied for an extra charge.