Veneer press

Joos HP80/3

Condition: excellent (used), functionality: fully functional, shelf length 3500 mm shelf width 1300 mm 8 hydraulic cylinders cylinder diameter 85 mm integrated oil heating power supply 380V Isdpfxeyxwzce Ag Ieib

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Isdpfjwivdkox Ag Ieib Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Isdpfxjx I Nz Ho Ag Ijib Max working width 1800 mm Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: good (used), Year of construction: 1975, functionality: fully functional, Veneer press - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5,500 kg - Electric heating plates, no dents - Pressing area height: 400 mm - 6 cylinders - Rack and pinion guide - with emergency pull cord - Pressing area height: 400 mm Iedpfxsx Akuzj Ag Ieib - 6 cylinders - Rack and pinion guide - 27 kW, 380 Volt - Piston diameter: 80 mm Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers. Shipping available at extra cost!

Condition: excellent (used), Working width: 130 cm Working height: 41 cm Length: 255 cm Electrically heated grates 4 pistons Ijdpfx Aoygxbljg Ieib 18 kW

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE safety features - Support arm with ruler and side stops Iisdpfxoxwvpts Ag Iob - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg

Condition: excellent (used), Year of construction: 2002, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm Iisdpex Sqlzofx Ag Iob total pressure 160 tons safety line switch year 2002

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Custom conversion upon request! - Tmax 160°C - Vertical lift door - Internal dimensions (L x W x H): 3300 x 2500 x 1150 mm Iodpfjxd A N Tjx Ag Isib - Controller: JUMO IMAGO - Air management: 6 fans, 6000 m³/h per fan - Net weight: 3000 kg - Connected load: 65 kW - Connection: 400V 50Hz-3/N/PE 100A/phase Oven, ovens, industrial oven, preheating oven, drying oven, hardening oven

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Iiedpfxsy Aplzj Ag Ieb Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. Iiodpfxoymmgij Ag Ieb The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point