Multi driller for honey bee frame elemen

Jela Stil Masine JS-VB 480

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. Ppsdpfx Ajxqggcealjl • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression Podpfsu Uvalsx Aalopl of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Year of construction: 2022, condition: new, Multisaw machine for precision cut of small elements that is used for honey bee frame productions -Power 11kw -Spindle diameter fi 70mm -Saw number 10 -Saw diameter 210mm -Minimum length of work peace 100mm Psdpeh Hxycofx Aaljpl -Max height 40mm -Feeding speed 4-8m/min -Quick-change saw holder

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power sanding unit 15 kW Ppjdpjtppzvefx Aaljl Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: new, functionality: fully functional, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 3,520 kg, lifting power: 1.4 kg/m, lifting height: 2,538 mm, tire size: 20,5-70 R16, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,400 kg, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 3514 – The powerful wheel loader for versatile applications Advantages of the H&R 3514 Articulated Loader Psderkmfxopfx Aalopl Powerful engine: The Yunnei DEF20CFF4 50 hp engine delivers maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1400 kg, the H&R Wheel Loader 3514 remains relatively maneuverable – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between various attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R 3514 wheel loader offers a spacious, air-conditioned comfort cab with an adjustable seat and steering column, diesel auxiliary heating, and rearview camera. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 3514 Wheel Loader • Fully equipped • Includes standard 150 cm bucket and pallet fork • Powerful and versatile – versatile • Compact design ensures good maneuverability • Comfortable cab with heating, ventilation, and a diesel auxiliary heater • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • MP3 radio and USB port for entertainment while working • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Net: €22,530.00 VAT: €4,280.70 Gross: €26,810.70 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 50 hp Emissions class: Euro 5 Lifting height: 2538 mm (bottom edge of standard pallet fork) Unloading height: 1950 mm (standard bucket tipped out) Lifting capacity: 1400 kg Wheelbase: 2200 mm Tires: 20.5-70 R16 Dimensions: 3870 x 1750 x 2570 mm Weight: 3520 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Year of construction: 1986, condition: not inspected (used), 6 head rotating vacuum capper rebuild 2017 as-is Psdpof Rk Agsfx Aalspl or tested and adjusted to customer needs.

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Ppodpfjumpp Eex Aalsl Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head Ppjdpfoin Nrgex Aalel 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg Ppsdpfx Aaegq Un Aolsl

Year of construction: 1998, condition: good (used), ROTOFLEX R 1300 Slitter / Rewinder Specifications: Ppedsq T Schepfx Aalsl  Age: 1997  Width : 13" (330mm)  Unwind shaft diameter: 76mm  Rewind shaft diameter: 76mm, 50mm, 40mm  Location : Germany Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly)