CNC Lathe

INDEX G200 Compact

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Ihsdpfxoxlkq Uo Ah Nst Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: new, Ramp 10T premium, internal usable width 2m TM-GROUP, the best choice on the market. ⭐️ Galvanized ramp grating! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum lifting capacity: 10 tons Ihjdpfx Ahewa Smpj Nst - Internal width of the ramp: 2000cm - ELECTRIC and manual control of the ramp height 1m - 1.6m - galvanized ramp grating - Reinforced ramp barriers on both sides - Solid rubber transport wheels - Central ramp handle allowing the ramp to be moved with a forklift - Adjustment of the angle of inclination and height of the flap - Double-sided, reinforced ramp supports - Moving elements of the ramp equipped with lubricators - The ramp is also equipped with a reel ✅ Ramp grating: - Galvanized grating with anti-slip grooves. Safe and secure ground. Forklift and pedestrian traffic are guaranteed the best possible traction and solid support. The competition mainly offers ramps in which the approach is made of sheet metal covered with mesh. Our product has the aforementioned grid with grooves - a much more durable solution, thanks to which dirt from under the forklift wheels does not remain on the ramp, and the truck itself does not slip. ✅ Forklift handle - can be installed on both sides: - Convenient and quick attachment for the forklift allows the ramp to be transported in all directions. A specially designed handle allows the ramp to be maneuvered even in limited space. ✅ Chain for connecting to a TIR, wagon or permanent warehouse ramp: - A solid steel chain is another advantage of our ramp, additionally, the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side barriers: - Safety barrier with the possibility of unscrewing and installing a frame/roof (roof is optional). ✅ Electric control of the ramp height: - Smooth electro-hydraulic drive uses a high-class pump. The pump requires 230V, so it can be operated from a regular socket. ✅ Double-sided hand pump: - Hydraulic pump for height adjustment in the absence of the possibility of connecting to the electro-hydraulic power supply - double-sided lifting. This is an excellent solution ensuring work in all conditions. ⭐️ We offer the following variants: ⭐️ - Driveway width in the ranges of 1700 cm, 2000 cm and 2500 cm Standard, Premium and Premium plus. - Mobile ramps with a load capacity of 10 tons, 15 tons and 20 tons and 25 tons. - Thickness of driveway grids 3 - 5 cm. - Colors: red, blue, black and green (it is possible to produce a ramp in any color - individual order) - Mobile ramp with tarpaulin. As a manufacturer, we can produce ramps for special, individual orders - with different dimensions, load capacities or variants. Do you need an individual solution that you cannot find by browsing all the ads? Ask our specialist. Tags: Loading ramp, unloading ramp, loading ramp, mobile ramp, loading dock, loading dock, mobile loading ramp, mobile loading ramp.

Condition: excellent (used), Year of construction: 2010, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170e² Baujahr: 2010 Schließkraft: 220 Tonnen Iedpfju E E H Sox Ah Neht Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 47 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: ready for operation (used), Cone Crusher Svedala Brand: Svedala Iodjpn I H Tspfx Ah Njht Type: 36/H/MC Incl.: basic chasis and oil unit

Year of construction: 2002, condition: excellent (used), GILDEMEISTER LATHE CTX 420 V6 SIEMENS 840 MATR. 2260000551 YEAR OF CONSTRUCTION 2002 SIEMENS 840 NUMERICAL CONTROL C- and Y-axis WITH 12-POSITION MOTORIZED TURRET RADIAL VDI 40 EQUIPPED WITH: 1) THROUGH CYLINDER DIAMENTRO 66 2) SELF-CENTERING CHUCK AUTOBLOK MOD. 250-66 BHD ON THE MAIN 1) AUTOBLOK SELF-CENTERING CHUCK MOD. 175/52 BHD ON THE COUNTER SPINDLE 1) CHIP CONVEYOR 1) 5-BAR COOLANT PUMP 1) WORKPIECE UNLOADING ARM TRUNCATED FROM BAR Isdpfx Ahsmv H Dxe Njht

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Isdev Drigspfx Ah Noht Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: Iodpfxotzyx Ts Ah Neht - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel Iodpfx Ajr Ezfpoh Neht drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Condition: used, CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools Ijdpfx Aheqn E U Te Neht

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: Iedpfen Ut Iljx Ah Neht - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.