GA90 screw compressor

Atlas Copco GA90

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Hodpfx Ahoxl Hxbovei Volume (L): 1500 L

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Lifting height 9 meters Hsdpfeqiz N Rox Ahvji

Condition: good (used), Year of construction: 2012, MANUFACTURER: ATLASCOPCO MODEL: GA90FF S/N: API613191 YEAR: 2012 POWER (kW): 90 CAPACITY (m3/min): 16.21 PRESSURE (bar): 10 HOURS (DOC/TOTAL): 59581 FREQUENCY INVERTER: no BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air Hsdpsyll Ddjfx Ahvei

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Hsdpoxx Snbofx Ahvei Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: used, Year of construction: 1981, -1- used hard rock impact crusher, feed approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, with electric motor Hodpfxsw N Hk Hs Ahvei

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Hsdpfxoxmkc To Ahvji

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Max pressure: 10 bar Hsdjxn Sw Ispfx Ahvsi Power: 90 kW - 110 HP Capacity: 16,200 liters/min

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Hjdpfob Ez R Usx Ahvei Weight: approx. 100 kg

Condition: excellent (used), Year of construction: 2016, ATLAS COPCO GA90VSDFF screw compressor – unit with frequency inverter and air dryer, after service. Hsdpfxsyfpcws Ahvei Technical data: Capacity: 17.59 m³/min Motor power: 90 kW Max pressure: 12.75 bar Year: 2016 Operating hours: 12,846 h Price: 69,500 net / 85,485 gross The compressor is fully functional, ready for operation, and comes with a warranty. Service provided. See video link below.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Value Motor Power 90 kW (approx. 125 hp) Max Operating Pressure 8.6 bar to 13 bar (125–188 psi) Free Air Delivery (FAD) ~565–588 CFM; 125 psi Cooling Type Air-cooled Noise Level ~74 dB(A) Drive Type Direct drive Integrated Dryer Yes (Full Feature “FF” version) Voltage 400V / 50Hz or 460V / 60Hz Dimensions (L×W×H) ~2179 × 1300 × 1968 mm Weight ~1500 kg Hodpfeyam Tcjx Ahvji Performance & Features - Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. - RDX Synthetic Oil: Long-life lubrication for reduced maintenance. - Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. - Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. - Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance - IP55-rated motor: Dust and water-resistant for harsh environments. - No-loss condensate drain: Prevents compressed air waste and reduces downtime. - Sound-insulated bodywork: Minimizes noise and vibration. Machine status: WORKING

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Hodsxbrw Uspfx Ahvsi

Condition: good (used), Year of construction: 2000, Screw compressor Manufacturer: Atlas Copco Hsdpfx Ahevi E Uyjvsi Type: GA 90 Year of construction: 2000 Power: 94 kW Pressure max: 10 bar Speed: 1,487 rpm

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Hedpfjxnz Naex Ahvji Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use.

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Hedpfxex A Eupe Ahvei Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2015, operating hours: 67,310 h, functionality: fully functional, 90 kW at 7.5 bar and 16.87 m3/min. Hjdpowfckcsfx Ahvsi Built in 2015 with approximately 67,310 hours.