Vertical machining center

HWACHEON Vesta 1000

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Kdodpfxsy Iztus Abfsn Clamping surface: 1,100 mm x 500 mm Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 30 pcs Tool holder: BT 40 MACHINE DETAILS Control: Fanuc 0i EQUIPMENT Chip conveyor Internal coolant supply HWACHEON Automatic Workpiece Changer Magazine capacity: 8 pallets Max. workpiece size, rectangular: 420 x 170 mm Max. workpiece size, round: 300 mm diameter

Condition: excellent (used), Year of construction: 2004, pressing force: 400 t, stroke length: 680 mm, working width: 4,100 mm, Used, Very Clean high quality Bystronic 400ton x 4metre Cnc Hydraulic Press Brake for sale Very clean 4metre cnc pressbrake for sale – Bending / Folding machine down stroke pressbrake for sale With Extended daylight and stroke Make= Bystronic Model = PR10 400x4100 PR400 Bed Length 4100mm / 4.1metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 x2 Front powered sheet followers / lifting aids Hydraulic tool clamping CNC Hydraulic Press Kdodpfxov Dw Sye Abfon 400 Tonne Capacity Swiss made Cybelec Controller – MoEva12 Multiple Forming Tools Tool stacking system included Full Working Order and fully serviced with Bystronic UK Max closing speed 200 mm/s Complete with a good selection of tooling

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm Kodpfexvdtwex Abfsdn z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm max. table load 700 kg spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: M281364F3ND, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D inkl. Shopmill, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Kodpfx Aeygxkmobfodn Travel range X-axis: 1,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 24 pcs Tool holder: BT 40 MACHINE DETAILS Control: Siemens 828D incl. Shopmill Machine weight: approx. 6.5 t EQUIPMENT Hinged belt chip conveyor Internal coolant supply up to 30 bar

Year of construction: 2013, condition: like new (used), functionality: fully functional, PiGo Fruit Pitting Machine – Sour Cherry & Plum | Stainless Steel | Fully Overhauled | 2 Machines Manufacturer: PiGo (Italy) Type: Industrial Fruit Pitting Machines Quantity: 2 Units Condition: Fully Overhauled – Ready for Production Material: Stainless Steel (INOX) Complete Processing Line Includes: - 2 × PiGo pitting machines - Stainless steel machine stands - Screw conveyor for pit removal - Feeding conveyor belt for fruit infeed at platform Overhaul & Service: The machines have undergone a comprehensive general overhaul: ✔ New chains fitted ✔ New plates and needles ✔ Gearboxes serviced ✔ Bearings replaced ✔ Oil replaced ✔ Fully tested and ready for immediate operation Tool Sets Included (per machine): For sour cherries: - 11/22 mm - 13/28 mm For plums: - 37/20 mm - 42/20 mm Advantages: - Industrial processing capacity - Heavy-duty, high-capacity machine Kodpfsynwzmjx Abfsdn - Stainless steel construction Sale Conditions: - Sold only as a complete package - Warranty available - Inspection possible upon request Location: Croatia (EU) *More pictures and videos available upon request.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2022! Kdsdpfx Aboyf E Szsfon TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Milling spindle (BT40): 12,000 rpm MACHINE DETAILS Control unit: Siemens 828D Operating hours: Power-on hours: 26,247 h Spindle hours: approx. 400 h (total 4,727 h) EQUIPMENT - Active electrical cabinet air/air cooler - Network connection - USB interface - Spindle chiller - Side windows left and right for large components - Safety cabin with armoured glass - Coolant pump at spindle - Pump for chip flush device - Air at the spindle via M-code function - Operating status light - Oil separator - Electronic handwheel - ICS system (internal coolant supply) - Pump for ICS - 24-position tool changer - Hinge-type chip conveyor, rear discharge - Glass scales including purge air by Siemens - Wireless workpiece measuring system Renishaw OMP60 - Tool measuring system Renishaw NC4 - Automatic machine door Note: The Halter automation system as well as vices including zero-point clamping system are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions Kdodpfx Aex D Irmebfon • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: good (used), Year of construction: 2000, 20000 rpm, Kdsdsr Urm Sepfx Abfjn tool measurement on table will come, Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2005, Arburg 370S-800-150 Closing 80 TO Scrow 30 mm Bar spacing 37x37 Control S Year 2005 Operating hours 46201 ST Plus sprue picker Kjdpfxsidmc Ij Abfodn

Condition: good (used), Year of construction: 2017, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior arrangement. Equipped with Siemens Shopturn system, including a bar feeder, and supplied in full configuration. BASIC PARAMETERS Max. turning diameter in working area: approx. 410–500 mm Max. length: 800 mm Distance between spindles: approx. 1020 mm Swing over bed: approx. 700 mm Practical application: ideal for shafts, flanges, and housings up to approx. 800 mm Travels (axes) X: approx. 480 mm Y: approx. 100 mm Z: approx. 800–845 mm B axis: approx. 110° (5-axis machining) C axis: 360° (indexing + interpolation) These features make it a true turn-mill center (not a conventional lathe) Spindles Main spindle speed: approx. 5000 rpm Power: approx. 25–34 kW Through bore: approx. 76–87 mm Sub-spindle speed: approx. 6000 rpm Milling spindle (main difference compared to a standard lathe) Speed: up to 12,000 – 20,000 rpm Ksdey Rgafopfx Abfodn Power: approx. 19–22 kW Taper: HSK-A63 or Capto C6 Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System Magazine: 24–48 tools Live tools: yes (fully integrated) Control system: Siemens 840D sl + CELOS (most common) Weight and dimensions Weight: approx. 10,000 kg Dimensions: approx. 6.5 × 2.7 × 2.0 m