MILLING MACHINE

HURE UNIVERSELLE 514

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Pjdpfxsxyllvs Ak Hjgr Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 2014, Technical details: max. wheel diameter: 150 mm Pedpjxtbmiofx Ak Hogr gear width: 350 mm max. module: 4 total power requirement: 48 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 4,88 x 4,40 x 3,56 m spindle turning speed range: 100-1000 U/min Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. *

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) Psdpfxjwya A Se Ak Hogr - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), centerless grinding machine Pedpfx Akotrguvo Hjgr

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Podpsh E Sghsfx Ak Hjgr Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED Pgedpfx Aksyyb Ics Hor ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Psdpoyw Inqjfx Ak Hegr Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Pedpfoyz Stlox Ak Hogr Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm Podpfx Aod Rxw Hsk Hjgr carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Turret head B-axis with 1° division Belt filter system included Pgsdovt A Rtopfx Ak Hjr