Tool milling machine

DECKEL FP1 Aktivdigital

Condition: used, Year of construction: 1984, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 digital readout 3 Achsen HEIDENHAIN spindle turning speed range 40 - 2000 U/min quill stroke 60 mm feeds -stepless- 5 - 500 mm/min table-size 600 x 210 mm rapid traverse 1200 mm/min power capacity 1,6 - 2,0 kW table load 200 kg voltage 400 V weight of the machine ca. 800 kg dimensions of the machine ca. 1,15 x 1,15 x 1,65 m electric cabinet 0,60 x 0,35 x 0,90 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light Dsdpfx Aezz S Duoilocn

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm Dedpfxjxwp Ebo Ailscn spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Dodpfjzinzxox Ailocn Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base Dcsdpsr D T Uyefx Ailen - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Djdpfx Aiedzqb Eslecn Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Dodpeyxy Swefx Ailecn Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: excellent (used), Year of construction: 2012, Partially overhauled Dodpfx Aijyffigjlecn Heidenhain Manual Plus 620 control system Working area: Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips Dcjdpfstv Riaox Ailsn - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. Dodpfx Aemhfrreilocn For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: good (used), diamond core drilling machine -Drill stand Dsdpfx Asb A H U Aoilocn -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm