Vertical machining center

Hurco VMX 42

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Hurco VMX42t was manufactured in 2007. It features an X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1270 x 610 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42t vertical machining centre we have for sale. Contact us for further details. Lrodpfjzwgztox Ahker - Control System: WinMax / Ultimax- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 15 KVA- Full Load: 30 KVA- Interrupt Capacity: 10,000 AMPS- Additional Features: Chip conveyor, Simulation graphics, Tool and material library, Pocket milling with island, Synchronous thread cutting without compensating chuck, High-pressure through-spindle coolant

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Switch Cabinet left Ljdpfjd Egc Aex Ahkjrr X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. Lrodpfsy Tw R Hsx Ahkor • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2019, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2019 Control : Hurco MAX5 Speed : 12000 rpm Movement X/Y/Z : 1067/610/610 mm Tool holder : SK40 Spindel: Technology:Motorspindle Speed:12.000 rpm Power:36,5 kW Lsdpfx Ahjzuik Esksrr Torque:118 Nm Taper:SK 40 NC-Swivelhead: B-Axis:0,001° Swivelrange:-/+ 92° NC-Roundtable: C-Axis:0,001° Clamping surface:ø600 mm In general: Toolmagazine:40 Stations Clamping surface Static table:1.270 x 610 mm Tableloading (max.):1.360 kg Rapid travers in X/Y/Z:38/38/32 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Filter and High-pressure, 20 bar Workpiecemeasurement:Funk-Touchprobe, Renishaw RMP 600 Oilmistseparation:Interface mechanical preapred Setup operation:Electronic handwheel Further Equipment:Rinsing pistol

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t Lrjdpfx Asu Iddnjhkjr dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: like new (used), Year of construction: 2018, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: HURCO MAX5, overall weight: 6,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 3,900 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The machine is in like-new condition and ready for immediate use. Ledpfx Ahjzuxidjkjrr A video can be sent upon request.

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 1060mm/610mm/610mm, table dimensions X/Y: approx. 1270mm/610mm, max. table load: 1100kg, spindle power: 18kW, feed rate: 7600mm/min, rapid traverse: 30m/min, tool positions: 24, tool holder: SK40, speed: 12000rpm, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 450mm/3750mm/2800mm, weight: approx. 6700kg, control: Hurco Ultimax 4. Documentation available. On site inspection is possible. Lrjdjyh Nvmjpfx Ahker

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Lrjdpfx Ahetylazsker Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Internal coolant system Ljdozmy T Ujpfx Ahkorr Chip conveyor Detachable handwheel

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Lrodpozguh Hsfx Ahkjr Spindle cooler Hurco MAX 5 control with WinMax software

Condition: reconditioned (used), Year of construction: 2016, operating hours: 13,425 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 0i-MF, table load: 600 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15 W, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​DOOSAN DNM 4500 vertical machining center with Fanuc 0i-MF CNC Lrodpsynlzuefx Ahker

Condition: used, Year of construction: 2014, Milling machines Lrodpfxezguhyo Ahksr Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, Lrjdpfxszh Nczj Ahkjr 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: used, Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, for sale is a very well-maintained Mazak VCN 530C vertical machining center with Lehmann 500 Series 4th/5th axis from 2017. This machine impresses with its high precision, reliability and productivity and is ideally suited for single part and series production. Lrsdpfjzinvcsx Ahkjr CNC Control: Mazatrol Smooth G X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Machine tablesize: 1300 x 550 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor - Cooling by the spindle 15 bar - Renishaw MP60 - Lehmann 4th/5th axle, type 500-Series, T1-510520. LL-TAP2-M14 with Schunk chuck - Lehmann tailstock, type: RST. LIG-80H If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, Hurco VMX 42 i, Year of manufacture: 2006, Control system: Ultimax 4, Travel range X/Y/Z: 1060/610/610 mm, Tool changer: 40 positions, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Chip conveyor, Internal coolant system (IKZ), Lredpfx Aszg E Nuohksr X and Y axes have slight play.