Vertical panel saws Holz-her 1998

Holz-her

Condition: excellent (used), Machining Centre HOLZ-HER EVOLUTION 7405 -used- Throughfeed processing; 4-sided trimming possible; integrated vacuum pump; automatic suction cup positioning; hardened, dust-protected prism guides; ball screw drives on all axes; network card for remote maintenance; integrated control cabinet; control cabinet cooling with heat exchanger; manual control device; XL drilling head; saw unit for slotting in X direction; pick-up tool changer; automatic central lubrication. ----- Technical Data ----- Min. workpiece length X: 200 mm; Min. workpiece length Y: 70 mm; Min. workpiece thickness: 8 mm; Max. workpiece length X: 3,200 mm; Max. workpiece length Y: 920 mm; Max. workpiece thickness: 70 mm; Machine control software: CAMOUS HOPS; Main spindle motor power: 6.5 kW; Main spindle speed: 1,000 - 18,000 rpm; Main spindle taper: HSK-F63; Drill unit motor power: 1.7 kW; Drill spindle interface: M10, fitting diameter 11 mm; Number of vertical drill spindles: 13 units; Number of horizontal twin drilling spindles in X-direction: 2 units; Number of horizontal twin drilling spindles in Y-direction: 1 unit; Saw blade diameter (saw unit): 120 mm; Number of tools in changer: 6 units; Extraction port diameter: 2 x 120 mm + 1 x 140 mm; Required air volume: 4,100 m³/h; Required static vacuum: 2,500 - 3,000 Pa; Required air velocity: 30 m/s; Compressed air connection: 6 bar; Compressed air consumption: 300 l/min. Cjdpsyrp Srofx Aa Espw Quality Information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer specifications - immediately ready for operation

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed unit, 30 mm spindle, 50 mm milling width. Machine dimensions: 1000 x 1000 x 1300 mm, weight: 250 kg, in good condition, fully functional. Shipping available at additional cost. Cpedpfsvkgdrox Aa Ejw

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Condition: unchecked Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 Cpodpfx Aaeyq T Ins Esw - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Cpedpswv Uq Asfx Aa Eew Shipping possible at additional cost

Condition: used, Year of construction: 2002, with jointing unit Total length: 6,790 mm Depth: 1,145 mm Max. height: 2,264 mm Workpiece support height: 850 mm Edging thickness: 0.4 - 25 mm Max. edging height: 66 mm Min. edging length: 200 mm Min. workpiece width: 60 mm Min. workpiece length: 140 mm (with 60 mm workpiece thickness) Max. workpiece length: approx. 6,000 mm Workpiece thickness min./max.: 6/60 mm Air requirement: 3,000 m³/h Extraction port diameter, main machine: 160 mm Extraction port diameter, jointing unit: 125 mm Weight: approx. 2,800 kg Storage location: Supplier Codpfsypwk Dex Aa Espw

Condition: used, Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Cedsyrq Eaepfx Aa Espw Polishing unit

Condition: ready for operation (used), Year of construction: 2016, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Cjdpfx Asyrniioa Ejpw Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Cutting height 2200 mm x cutting length 5300 mm (Edging height / max. horizontal cutting height 2110 mm) PowerPackage 400 V The package consists of the following options: 1. TRK extraction unit 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed control (9 kW output) Pneumatic aluminum slatted support Medium workpiece support on all fields Strip stop for recurring horizontal cuts Digital measurement display for horizontal cut at control panel Visible cut line laser Cpedpjynpc Ajfx Aa Ejw Paper storage compartment Narrow parts device (2 pieces) Location: Solingen Availability: Short-term

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Codpfx Aaow I U E Aj Ejpw Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Cpedpfx Aaow Nac As Eew Availability: by arrangement Location: Flörsheim