TOP | Year of manufacture 1984

Hess Hydro

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Features and technical data: - Electro-hydraulic - Automatic final pressure release and follow-up switching for constant pressure maintenance - Central pressure beam with quick-adjustment cylinder, pressure cylinder, and abutment - Additional horizontal pressure cylinder - Press area approx. 3000 x 2250 mm - External dimensions 4000 x 2750 x 850 mm - Equipped with 3 horizontal pressure cylinders - Equipped with 2 vertical pressure cylinders - Cylinder stroke 150 mm - Pressure force per cylinder: 2000 kp at 100 bar - Working pump pressure capacity: 100 bar Isdpfx Agsyq T Hwo Ijib - Support and pressure plate depth: 100 mm - Electric connection: 1.5 kW Availability: short-term Location: 63934 Röllbach

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm cutting height 100mm Total connection 39kW Iiodpfxoucnuko Ag Ieb

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Iodovwfw Djpfx Ag Ioib

Year of construction: 1998, condition: ready for operation (used), A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible. Iiodpfewv Umwsx Ag Ieb

Condition: good (used), Feed through production line for wooden doors very hight efficiency one complete door in 30 seconds (lock hole, handle hole, anuba hinges) Iisdpfxsuq Scpo Ag Ijb Machine composed from two parts - so in the same time 2 doors are processed each from both sides Each part of the machine can work independent on the left side and right side Part 1 - left side milling for strike plate and milling handle hole and key hole - right side in the same time makes boring for anuba hinges Part 2 - left side milling for lock hole - right side in the same time makes inserting anuba hinges

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation Iodpfxeiinm Hs Ag Ioib motor brake socket for feed unit Protective covers for hand milling spindle Ø 30 mm Aigner stop suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Iiedjuzkxxopfx Ag Ieb Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: used, Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Iijdpoxnqw Tefx Ag Ieb Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm Ijdpfx Agox Enpqe Ijib - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° - n = 5,300 rpm - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: - 18-position carousel magazine - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Iijdpfox Tu N Hsx Ag Ijb Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...