Centerless grinders Herminghausen 1986

Herminghausen

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens Dsdpowbvhasfx Ab Tjwf turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Dwedor Ezfpepfx Ab Tof Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

Year of construction: 1987, condition: ready for operation (used), There are two Nomoco M100 available, operational hours counter: 55,998h, with instruction manual, machine 1 is functional, but on machine 2 the control system has lost machine-specific programms/data that must be reloaded. Dwsdpek Adhfofx Ab Tef

Condition: refurbished (used), Hydraulic Pump Sperry Vickers Type: GPA2-10-E-30-R-GE 334with attachment clutch gear motor Leroy - Somervon Kupplungstechnik Dwedpfx Asd Szm Tsb Tjf

Condition: used, Centerless grinding machine ESTARTA 310 Dodsq Ehqfepfx Ab Tjwf

Condition: good (used), Centerless grinding machine Good condition, fully operational, can be inspected and tested on site. Shipping abroad is also possible. Inspection: As a general note, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask questions before buying to avoid any ambiguities. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. Dedpfxsw Rcu Re Ab Tjwf VAT is shown separately on my invoices. Shipping via freight forwarding.

Year of construction: 1994, condition: ready for operation (used), Workpiece diameter min./max.: 1mm/100mm, max. grinding length through-feed grinding/penetration grinding: 300mm/180mm, grinding wheel dimensions: 400mm/180mm/203mm, wheel wear grinding wheel/control wheel: 100mm/80mm, speed: 600rpm. Documentation available. On-site inspection is possible. Dwedpfx Abewu Ez Aj Tof

Condition: used, functionality: fully functional, spindle bore: 12 mm, feed length Z-axis: 50 mm, Automatic single-spindle lathe for screws Dodswvigrjpfx Ab Towf

Condition: good (used), TECHNICAL INFORMATION: Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual plongeé Main engine power: 20 Kw Voltage: 380 V Dedpsrpnf Rjfx Ab Towf Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: 4315Kg approx. machine + 60 Kg drawer

Condition: not inspected (used), Year of construction: 1976, Spitzl. Cylindrical grinding machine Nomoco M100 Offered here is a grinding machine from the company Nomoco of the type M100. Technical data: Manufacturer: Nomoco Type: M 100 year of manufacture: 1976 max. grinding diameter: 100mm max. grinding length: 180mm Djdpehc S Spefx Ab Tswf grinding wheels: Ø 400mm max. grinding wheel width: 180mm weight: 3,2t grinding type: plunge grinding