Ring and profile bending machine / HERKULES

HERKULES BO 230 K2

Condition: new, prebending: 13,0sheet length: 3100sheet thickness: 16,0total power requirements: 17,5weight approx.: 11,6messurements (LxWxH): 5,31x1,66x1,59 Gsdpfx Agjd Auacsbsil

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm Giodpfx Agsxddvnsbsl turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Manufacturer: Trebel Godpfxohikdwo Agbsil Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Giedjr Dduropfx Agbsl Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: used, functionality: fully functional, Year of construction: 1989, roller (top) diameter: 200 mm, side roll diameter: 150 mm, sheet thickness (max.): 6 mm, working length: 3,000 mm, Working length 3000 mm Bending capacity 6 mm Bending capacity 4 mm Top roller diameter 200 mm Gisdpfx Agouzm Ayebsl Diameter of side rollers 150 mm Hydr. folding bearing

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible. Giedpfxed Hxx As Agbjl

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Tooling: Customer choice Godpog Dvfwofx Agbsil Features:Included cap sorting as-is or adjusted to customer needs

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Gisdpfefw Ah Rjx Agbsl Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Year of construction: 2019, condition: new, The creation of a written offer / cost proposal for a powder coating system of the company Romer. Giodoc Sd D Sspfx Agbsl

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Gijdpfx Agown Hgtsbjl Automated loading and unloading. Operation by waterfall system. Control panel. Valves.