Hydraulic plate shears

HERA HSS 3 2500 x 4,0

Condition: good (used), Year of construction: 2012, 900mm Swing, Codpswnfzcsfx Ab Teaa 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2008, X/Y/Z travel: 900 x 400 x 200 mm Cajdpfx Abjv Irwrj Tsa Table size: 800 x 400 mm

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is straightforward and requires only two easy steps: filling the bag from above and sealing it. For sale: Autobag bags in the following sizes: 150x250 – 1.5 million bags 200x320 – 2.5 million bags Full Euro pallet pricing: 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on Cajdpfxor E Dpze Ab Tja 10 pallets or more: €0.01 per bag 1 million Autobag bags from €0.01 each.

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. Codpsrt Ip Nefx Ab Teaa C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator, drilling depth indicator and a movable head. 125 mm vice included. The model is equipped with smooth regulation of spindle speed. Caedpfsridnvjx Ab Tsa Machine description smooth regulation of spindle speed LED lamp work table and base equipped with T-slots solid, torsion-resistant column tiltable work table from -45° to +45° drilling depth stop with scale Technical parameters Maximum drilling diameter 25 mm Maximum handle diameter 16 mm The distance of the spindle axis from the column is 215 mm MK3 spindle cone Spindle extension 150 mm Column diameter 80 mm Motor 400 V / 50 Hz / 1500 W Gearbox YES Base dimensions 580 x 415 mm Table dimensions 356 x 356 mm Total height 1710 mm Spindle speed range (50 Hz) 180–2000 rpm Table travel range 600 mm Dimensions after packing (length/width/height) 1510 x 690 x 256 mm Weight 95 kg

Condition: excellent (used), Year of construction: 2006, Sheetlength: 3100 mm Cutting capacity: 6 mm Backgauge reach: 750 mm Featured with: - 3 Sheetsupports frontside - Access protection backside - Footpedal Casdpfon Smtqsx Ab Tea Motor power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 01049, Offer 22461 Technical data: - nominal power at 50% ED 35 kVA - max welding power 75 kVA - throat adjustable 280 to 600 mm - stroke 5 to 50 mm - Welding values sheet steel approx. 4 + 4 mm - electrode force adjustable up to 44,5 daN - cooling water quantity 4 l/min Cajdpfxjimbmrs Ab Tea - connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - weight approx. 220 kg - with: - single-phase control T 90 Mark II - foot switch

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Cjdpfoh Ha Ipex Ab Tsaa Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Cajdpfogwt S Tsx Ab Toa Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data Cajdpfx Abeu Hiq Ro Tsa