Horizontal machining center

Heller H2000

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,339 h, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840D Solution line, table load: 600 kg, number of axes: 4, This 4-axis HELLER H2000 horizontal machining center was manufactured in 2017. It features a Siemens 840D Solution Line control, rapid traverse of 60,000 mm/min, and a spindle speed of 10,000 rpm. The machine can handle workpieces up to 720 mm in diameter and 850 mm in height, with a maximum table load of 600 kg. Consider the opportunity to buy this HELLER H2000 horizontal machining center. Contact us for more information about this machine. Additional equipment • Chip conveyor • Coolant filtration with paper filter KF 400 • Through-spindle coolant, 50 bar • Work area flushing Machine Benefits Itjdpfx Ahoyarzlevod Technical Machine Benefits • Acceleration: 8 m/s² • Standard color: grey-white / sand grey / ultramarine blue • Max. Workpiece diameter: 720 mm • Max. Workpiece height: 850 mm • Nc rotary table, indexing 360000 × 0. 001° • Clamping station, manually operated pallet, 4 × 90° • 2 pallets, 400 × 500 mm • Tool magazine positions: 54 Extra Information Operating mode: Mode 3 Electrical: 50 Hz, 400 V Hydraulic interface for tool clamping, 5-fold, 60 bar Additional hydraulic control line Hydraulic connection kit with couplings (2 units) Nosepiece for multi-spindle head Infrared receiver for RENISHAW probe RENISHAW probe Drill breakage detection system Signal tower (red-yellow-green) Technology cycles package Additional operating panel at tool magazine

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Ijdpfx Asx D Ew Hjhvjtd Additional equipment • Tool Magazine: Additional magazine ZM157 • Tool Breakage/Measurement: BLUM tool breakage/measurement • Measuring Probe: Heidenhain • Event Messenger: Available • Electrical Heat Compensation: Provided • External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters • Rotating Transparent Window: Available • Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Machine Benefits Technical Machine Benefits • Nc swivel rotary table: diameter 280 mm • Table axis: a-axis off-center / table specification: 6-way rotary feedthrough • Spindle hours: approximately 50000 hours • Internal coolant supply: 80 / filter: paper belt filter / conveyor: scraper belt conveyor / automatic cabin door: yes • Polycarbonate safety glass: windows / frequency: 50 hz • Rs automation Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2016, operating hours: 59,654 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, nominal power (apparent): 38 kVA, torque: 242 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece width (max.): 850 mm, workpiece height (max.): 850 mm, workpiece diameter (max.): 720 mm, workpiece weight (max.): 800 kg, total height: 3,400 mm, total length: 6,300 mm, total width: 2,750 mm, table width: 500 mm, table length: 400 mm, rotational speed (max.): 10,000 rpm, overall weight: 10,000 kg, Operating hours: 59,654 Year of manufacture: 2016 Control: Siemens 840D SL Spindle: PC63 10,000 rpm, 38kW, 242 Nm Tool clamping system: SK40 Magazine / stations: Chain magazine / 160 stations Comfort operator terminal, main-time parallel setup Rotary table: 360.000° X 0.001° Coolant system: Knoll KF 400/50 bar Iodpfx Ajygln Sehvstd Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, features: Drill breakage control (SBBK); FMS interface, infrared receiver touch probe (Renishaw), extraction interface, coolant chiller

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Itjdpfox Hn D Dsx Ahved Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Itedpjv Igghofx Ahvsd Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Iodpfjx S Hm Iox Ahvjtd Height: 2600mm Weight: 14000kg

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e Ijdpjx D R Rrsfx Ahvotd • Chip conveyor • Clamping wedges for tools

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro Iedjx Avr Sjpfx Ahvotd b-axis 240 ° c-axis 360 ° number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Itjderx Sh Ajpfx Ahvod

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Measuring range X = 640 mm Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Resolution 0,5 um Max workpiece weight 300 kgs Max. speed 600 mm/sec² Air supply min. 5 bar Dimensions L = 1040 mm Ijdjwb Dn Uspfx Ahvetd Dimensions W = 940 mm Dimensions H = 2320 mm