HAAS VF-4

HAAS VF-4

Condition: ready for operation (used), Year of construction: 1997, operating hours: 9,218 h, functionality: fully functional, machine/vehicle number: 10842, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, table width: 457 mm, table length: 1,320 mm, table load: 1,500 kg, overall weight: 5,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, The machine was only used in single-shift operation in a special machine construction facility. No contract manufacturing was performed. The machine is being sold because the special machine construction facility is being shut down. The machine can be inspected while powered on. It is fully functional, and the documentation is available. This 3-axis HAAS FV-4 machine was manufactured in 1997. It has a travel distance of 1,270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine operates with a spindle speed of approximately 8,000 RPM and has the following operating hours: • Total operating time: 9218 h • Cycle time: 4584 Fpjdpfxe Aiun Ro Ah Ejp • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 20 A

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 Fjdeyalpcjpfx Ah Espp • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: reconditioned (used), Haas VF-4 CNC Vertical Machining Centre (2015) Haas CNC control X-axis travel: 1,270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table size: 1,321 × 457 mm Maximum table load: 1,588 kg Standard spindle speed: 8,100 rpm Maximum spindle power: 22.4 kW / 30 hp Spindle taper: 40 taper Automatic tool changer: 20-station carousel Rapid traverse rates: 25.4 m/min Spindle nose to table: 102–737 mm Supplied With: Haas rotary 4th-axis unit with three-jaw chuck, Matching Haas tailstock, Swarf auger and discharge chute, Remote jog handwheel, Coolant system, External tool storage racks and assorted tooling. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79299 Machine Serial Number: 1124936 Fpedpfx Ao Agn Dveh Eop Cost: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 14,700 h • Tool changes count: 67,000 • Voltage: 354–488 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 40 A Fpedpfx Asz Dauweh Ejp

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: Fpjdpfx Ajyuqacjh Eep X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE Fodpfx As Afypksh Ejpp - Year of manufacture: 2008 - Type: Vertical CNC machining center - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2015, functionality: fully functional, Počet os: 3 Fpedpj Ad Iabofx Ah Ejp Pojezd osy X: 1270 mm Pojezd osy Y: 508 mm Pojezd osy Z: 635 mm Technická specifikace Výkon vřetena: 22.4 kW Rychlost vřetena: 12000 RPM

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Fpjdpfjulwg Njx Ah Eep Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! Fjdoz Nfirjpfx Ah Eepp This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 29384, travel distance Y-axis: 600 mm, spindle speed (min.): 7,500 rpm, Equipment: chip conveyor, documentation/manual, Used by a toolmaking company (QPP Hungary Ltd.) on a single shift. The machine has been continuously maintained, is accurate and precise, and is still in daily use. It features a 30+1 tool SK40 tool magazine and an internal coolant supply. Fsdpfewhqhuox Ah Eepp

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm Fodpfx Asxqc H Ssh Ejpp - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Fsdoz R Rf Ajpfx Ah Ejpp Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 31,300 h Fedpfsz Dar Nox Ah Eopp • Tool changes count: 69,000 • Voltage: 440 V • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 35 A

Condition: used, Year of construction: 2002, turning diameter 280 mm turning length . mm control Mazatrol 640 T x-travel 190 mm y-travel 309 mm z-travel 330 mm turning speeds 4000 U/min feed 30 m/min Fpsdpfx Ahezdu T Dj Esp number of tools 12 bar loader ja total power requirement 24 kvA weight of the machine ca. 3,5 t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes Fpodpfxez Ah S Do Ah Ejp • Auxiliary High-Pressure Filter: Yes