Machining Center - Horizontal

GROB-WERKE G500

Condition: used, Year of construction: 2008, Technical details: x-travel: 800 mm y-travel: 840 mm z-travel: 865 mm control: Siemens 840 D spindle speeds:: 10.000 rpm spindle drive motor: 20 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 4 x 3 m 4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine * Kdsdpfjxxl R Nex Ag Ajw

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Machine height: 3,271 mm Weight: 25,700 kg Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Ksdpfewwl Sajx Ag Aedw Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Kdedpfx Aget Hw Suo Aew Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) Ksdjlaugaepfx Ag Asdw KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: used, Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Kjdpfxjg Nqlie Ag Aedw Sales list with prices upon request.

Year of construction: 2000, condition: ready for operation (used), Cutting Erosion Machine MAKINO EU 64 X=600 mm Y=400 mm Z=260 mm workpiece dimensions WxDxH max 940x650x260 mm Workpiece weight max 1500 kg Ksdpfx Agjgwp Eqo Aedw Service due before commissioning !!! Current service report from Makino can be sent on request

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Kodpfx Ajgb Ec Hsg Asdw Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: excellent (used), Year of construction: 2016, operating hours: 26,678 h, functionality: fully functional, This machine is available exclusively through Montrasio GmbH and is being sold on behalf of the authorized parties. DMG DMU 100P duoBLOCK – 5-Axis CNC Machining Centre (2016) Year of manufacture: 2016 Control: SIEMENS CELOS Travel / Capacities X-axis: 1,000 mm Y-axis: 1,250 mm Z-axis: 1,000 mm Workpiece diameter: 1,100 mm Workpiece height: 1,600 mm Workpiece weight: up to 2,200 kg Table / Axes Table size: 1,100 × 900 mm Table rotation speed: 35 rpm Max. table load: 2,223 kg B-axis universal milling head swiveling range: −30° to +180° Spindle / Tool Spindle speed: 0 – 12,000 rpm Spindle motor power: approx. 69 HP (≈ 51.5 kW) Spindle taper: HSK-A100 Tool magazine: 63 positions Machine Dimensions Footprint: approx. 24 m² Machine height: approx. 3,606 mm Machine weight: approx. 24,540 kg Kdodpfx Aexl Arkeg Asw Accessories / Equipment CNC-controlled universal milling head (B-axis) Workpiece probe Tool measurement system 3D Quickset Chip conveyor

Condition: new, Year of construction: 2025, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Kjdsqqi Dkspfx Ag Ajdw Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Kedpfxeizlh Hs Ag Aedw Pick-up machine *