Miter saw

Graule ZS 85 NS-SW

Condition: new, The Danish flower trolley with identical dimensions to the CC trolleys is used for transporting and storing seedlings and flowers. The Danish shelf is equipped with shelves with a load capacity of 100 kg each (with evenly distributed load). The shelves are adjustable in height every 5.5 cm. This makes it easy to adapt them to the size of the plants stored. The Dutch trolley is made of high-quality galvanised steel, while the shelves are made of waterproof plywood. All this makes our flower trolleys robust and highly functional. The offer concerns the base flower trolley + 3 shelves : - Model : MPP000652 - Height: 190 cm - Width: 135 cm - Depth: 56.5 cm Net price : € 80.00 each. This offer concerns an additional shelf for a flower trolley : - Model : MTP002923 - Height: 4 cm - Width: 130 cm - Depth: 55 cm Net price : €10.00 each. The offer concerns the flower trolley base + 2 shelves : - Model : MPP000651 - Height: 190 cm - Width: 135 cm - Depth: 56.5 cm Net price : 70.00 euro each. The offer is for a base+ 3 shelf tilting flower trolley : - Model : MPP000653 - Height: 172 cm - Width: 140 cm - Depth: 56 cm Net price : €145.00 each Blodpfsm Ux S Eox Ab Tjr The Danish trolley is equipped with 5 inch castors are made of sturdy and durable polypropylene. The garden flower trolley has 2 swivel castors and 2 fixed castors, making it light to drive. The flower rack is made of galvanised stainless steel, which protects it from corrosion. This allows you to store cuttings and flowers both indoors and outdoors. An additional advantage is the waterproof plywood from which the shelf and base are made. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Four-head welding machine URBAN AKS 6410-35/25, with weld bead limitation 0.2 mm with stainless steel knife, maximum welding dimension 3,500 x 2,500 mm, WINDFOWS control, parallel feed system, feed direction from left to right. Blodpfx Ajxl Ud Ejb Ter

Condition: new, Year of construction: 2025, New assembly table with adjustable support bars COMALL JOB 15/3000 Technical specifications: - Contact surfaces in semi-rigid gray PVC - Loading: 180 Kg Bsdpsgiud Rjfx Ab Telr - Four length wise sliding supporting bars, clamping system through handle - Pneumatic system with two pneumatic connections - Hardware boxes, 6 pcs. - Extensible support, equipped with two longitudinal sliding bars

Condition: used, Year of construction: 2022, Sliding table: 3200 mm, cutting width: 1000 mm, CNC parallel fence, scoring unit, angle stop with digital display, electro-motorically tiltable and height adjustable, control panel at eye level. Storage location: Nattheim. Bodpfjxqtvqsx Ab Tjlr

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. Blsdjnl Nqqepfx Ab Tsr circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Bjdpfx Abewhn T Uo Tslr

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Blsdpfx Abjvnh T Ns Tsr Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 992.00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 21.00 euros 12 mm brackets (package of 3000 pieces): Price 31.00 euros 10 mm staples (package of 3000 pieces): Price 31.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized Bledpfx Ashpmawsb Tor motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Year of construction: 2024, condition: new, Number of drawer 11 Stk. weight ca. 150 kg table surface area 1370 x 515 mm work height max. 1110 mm range L-W-H ca. 1380 x 550 x 1110 mm Manufacturer's recommended price approx. 8.000 euros Tool range: 390 pieces Special price on request!! Equipment: - mobile tool trolley including wooden worktop - robust and stable construction - aluminum drawer handles - 11x high-quality drawers - 9x drawers with equipment Bljdpsxaa Nisfx Ab Tsr - including 390-piece tool range (!!) - Color = glossy green - 2x rigid castors / 2x steerable castors - including parking brake - central locking system

Condition: used, No. 04480 Cross-cut and mitre saw Graule ZS 135 N Used Bledpfx Abjw Htm Re Ter This machine type is used for cutting to length and for horizontal and vertical miter cuts, double mitre cuts are also possible Precise ball bushing guide of the tool slide on hardened and ground steel shafts Fast mitre adjustment up to 25° horizontally and up to 45° vertically Adjustable fixed stops at 90° and 45° Machine can be set to mitre in 2 planes Adjustable aluminum stop plates Sturdy cast iron construction Lower saw blade guard can be connected to extraction system 3 kW three-phase 400 volt brake motor (special equipment) Saw blade diameter 350 mm, Saw blade holder 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: Cutting height 92 mm Including saw blade for aluminum 350 mm diameter Including machine stand for type ZS 135 N Including roller conveyor RLK 3000 x 350 mm, with length stop with scale and material stop that can be folded back, roller diameter approx. 40 mm Transport dimensions machine approx. 1300x700x1700 mm LWH, roller conveyor approx. 3000x500x800 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse