Cross-cut and miter saw

Graule ZS 135

Condition: used, cutting width 330 mm Cutting height 135 mm Motor output 2,2 kW The Graule type ZS 135 cross-cut saw is a pivoting cross-cut saw for cutting to length and mitre cuts. Itjdjy Tpqlepfx Aktjg

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse Ijdjyh Nfujpfx Aktjtg

Condition: new, NEW Description: - Crosscut and miter saw with maximum cutting height of 135 mm Iodpovwf T Ssfx Aktjtg - Machines can be mitered in 2 levels - Stable gray cast iron construction - Precise ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Readjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to the extraction system Scope of delivery: Crosscut and miter saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm - Extractor nozzle diameter: 100 mm - Weight: 100 kg

Condition: used, power: 2 kW (2.72 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 135 mm, height adjustment type: mechanical, rotational speed (max.): 3,800 rpm, rotational speed (min.): 3,800 rpm, Graule crosscut and mitre saw ZS 135, max. cutting height 135 mm, max. cutting width approx. 430 mm, saw blade D = 350 mm, mitre adjustment +45°/ 0°/-45°, motor 2 kW, extraction port D = 100 mm, as inspected, ex location Seevetal, without transport, subject to prior sale. Itedpfx Akoy Sla Toteg

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system Itedpjramz Hsfx Aktjg - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility of triple drilling copy milling cutter or grooving system working as one - High frequency motor (18000 rpm) - Right conveyor system (1 meter)

Condition: good (used), saw blade diameter: 360 mm, Sliding saw / Mitre saw / Chop saw / Radial saw Wegoma zs 135 Mitre saw type ZS135 -Motor power: 2.2 kW -Saw blade: Ø 360 mm, swiveling Itedpfx Aoyckbijktog

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Crosscut and Mitre Circular Saws Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Extraction port: 100 mm Iedsymqkljpfx Aktjtg Weight: 100 kg

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Ijdpfx Akoi E Trpjtotg

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW Iedpfx Aksxabqzotstg weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Iedpfx Aeww Nd Tektetg Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Year of construction: 2016, operating hours: 10,900 h, condition: excellent (used), functionality: fully functional, The machine is in very good condition and fully operational. We don't need it anymore so it is for sale. It is regularly maintained. Dismantling and load on truck are included in price. Some other informations: 4-axis profile machining centre Designed for flexible and efficient machining of aluminium Iedpfx Akowwtylotstg Autonomous clamp positioning Max. working lenght: 7.600 mm 8 pneumatic clamps Tool magazine with 8 tools capacity Spindle working hours 5100h Additional tehnical specifications available on request

Condition: used, Cutting height at 90°: 135 mm Cutting length: mm Mitre range horizontal: - Mitre range vertical: -60° to +60° Itodpfx Akex I Ai Dstjg Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Workpiece clamp: yes Spray device: yes Extraction port: 100 mm Machine length: Machine width: Weight: 110 kg

Year of construction: 2004, condition: good (used), Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm Ijdpfx Ast Hafkektstg -Weight: 185 kg with pallet

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. Ijdju Idkzspfx Aktjtg *

Condition: reconditioned (used), functionality: fully functional, Year of manufacture 1997, connected load 380V 5.2A 2.0kW, saw blade diameter 350 mm, can be swiveled 45° on both sides, height adjustable with hand crank, cutting length 600 mm, extraction connection 100 mm, table height 890 mm, roller conveyor on the right with stop cutting length 3200 mm, roller conveyor on the left with stop cutting length 2200 mm Isdowhn T Uopfx Aktotg