5-axis machining center + automatic machine

GF Machining Solutions Mikron XSM600U

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center Casdpsuhantefx Ab Toa - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS Csdpfx Ajq Nqkxeb Teaa MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: refurbished (used), functionality: fully functional, center height: 100 mm, grinding length: 650 mm, Internal & external cylindrical grinding machine Studer S20-2 Centre distance: 650 mm – Centre height: 100 mm Accessories on request! Ready for delivery! Caodpfx Abjqv Eg Re Tja

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. Cedpfewk Nm Iex Ab Tsaa SK 40, 24 tool places in tool changer. 10.000 rpm

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Cajdpfev H Dgpex Ab Tsa

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: TNC7, table load: 5,000 kg, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, Used 5-axis machining center by DMG with TNC7 control system Casdpfx Ajxtwkwjb Toa Retrofit 2025 DMG Deckel Maho DMU 200 P Year of manufacture: 1999/2025 Condition: Good and fully functional Control: Heidenhain TNC7 Travel distances: - X-axis: 1800 mm - Y-axis: 2000 mm - Z-axis: 1100 mm Technical specifications: - Rotary table Ø1400 x 1700 mm - Table load capacity: 6000 kg - B-axis - 60-position tool changer - SK 50 spindle taper - 10,000 rpm - ICS (internal coolant supply) - 980-liter coolant tank - Chip conveyor - Rinsing gun - Infrared probe Optional: - Kineopt - VCS-Complete - High-frequency spindle, 30,000 rpm Transport and commissioning can be offered separately. Interim sale reserved. No guarantee is given for the technical details provided here. Statutory regulations apply.

Condition: used, Year of construction: 2005, x-travel 500 mm Cjdpfxew Eyg Ie Ab Tsaa y-travel 450 mm z-travel 400 mm control Heidenhain iTNC 530 c-axis 360 b-axis -5/+110 ° turning speeds 20- 10000 U/min power capacity - milling spindle 13 kW tool taper SK 40 no. of workpieces in the magazine 16 Stück rapid traverse 24 m/min table surface area 630 x 500 mm table load 200 kg weight of the machine ca. 4,0 t dimensions 2,3x 3,2 x 2,75 m 3 + 2 axis Milling Center - Turn-/swiveling table full programmable - electr. hand wheel - new spindel in 2015

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min Casdpfx Abjv E R Eie Tsa total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device Caedpfeu Ix Izex Ab Tja incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) Cjdpfx Aberiulge Teaa weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)