Die-sinking edm

GF AgieCharmilles FORM 2000 HP

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Guodpfx Akjyz Stls Ujg

Condition: good (used), Year of construction: 2012, Vertical CNC turning machine with a 12-position turret and powered tools; Year of manufacture 2012, in good condition; Fanuc 31i control system with Manual Guide i; 630 chuck – 900 mm turning diameter; Automatic door; 2-stage gearbox – resulting in very high torque; Tool setter, detachable; Chip conveyor; Guedpfxeztqp Ho Ak Uog Various tool holders, fixed and powered; Only approximately 4,100 operating hours. An inspection is possible and recommended by arrangement, with the machine powered on.

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to Gusdpfx Akevwgl Ne Ueg stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Gujdpeh Akm Tefx Ak Uog

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-hand machine) Technical specifications: Travel ranges: 450x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling level 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Power connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Newly painted light grey + telegraph grey New control cabinet New control system APC910/2 (win10) User interface MF30 V 2.8 New B&R drives with Endat interface Touchscreen Generator exopuls+ 60A Rev.4 Rotary table, 5-axis Touch protection, operated via buttons Linear scales in all axes X, Y, Z (Fagor) Cartridge filters 2 pcs Cooling unit Termogamma Completely new machine installation Gedpfx Akshtrdye Usug New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO2 extinguishing system C-axis Hirschmann 50/min., holding brake, completely overhauled Manual control panel with confirmation button Lowering tank with automatic follow-up Chucks Erowa IST, Hirschmann, 3R Warranty 12 months Transport Commissioning on-site Training

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Gedpfsxv Av Rsx Ak Ueug Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 Guedjyfnqgopfx Ak Uog - 12-position turret VDM 40 - C-axis

Condition: excellent (used), Year of construction: 2007, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 15,800 kg, operating hours of spindle: 13,500 h, coolant supply: 40 bar, We offer in good condition Deckel Maho DMU100P Duoblock from 2007 with only 13.500 spindle hours. Heidenhain iTNC530 control X-Axis travel: 1000 mm Y-Axis travel: 1000 mm Z-Axis travel: 1000 mm Internal coolant 40 bar SK40 12.000 RPM Spindle Gjdszlyd Dspfx Ak Usug Table Ø1100 x 900 Machine will be in stock in the next 2 weeks.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Model: VTC 300C-II Control: PC Fusion 640M Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Guedpfjyanuhjx Ak Ueg Tool holder: SK 40 Spindle power: 15 kW Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Can be inspected under power.

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Gjdpfju Nc Riox Ak Ueug Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *