Cnc lathe

Geminis SCNC 1000 DC x 2000

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, X 800 mm H 460 mm Z 510 mm Control FANUC Chip Conveyor Ffjdpfjv Th E Ajx Ac Neu Including 4-axis Rotary table.

Condition: new, Year of construction: 2026, TYTAN 750 PRO 400V universal lathe. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking and reaming holes. It is usually used in small industrial plants, workshops, garages, etc. Machine description The TYTAN 750 VARIO PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine that responds to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Main advantages: + A modern motor with smooth spindle speed regulation ensures comfort of use and shortens the calibration time. + The LCD screen with the spindle speed display allows you to control and quickly modify the spindle speed while setting the cutting and tapping modes. + Two spindle speed ranges: reduced (50-1250) for machining hard steels and increased (100-2500) for high-speed precision turning. + Threads cut: metric - 18 degrees (0.2-3.5), inch - 21 degrees (8-56) left and right threads can be cut. + The automatic longitudinal feed has 6 speed ranges (0.07 to 0.40) mm / rev. - thanks to it, the machining time is much shorter, which does not deteriorate the quality of work when turning long parts. + The TYTAN 750 vario PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine responding to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. + The machine is fully compliant with the requirements of EU directives (CE) as well as Polish regulations and DIN standards. Technical parameters dimensions Turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Claw spacing 750 mm Bed width 135 mm Spindle passage 27 mm Spindle taper MK4 Spindle speed adjustment smooth Spindle speed 50-1250 | 100-2500 rpm Number and range of metric threads (18) 0.2-3.5mm / rev Number and range of inch threads (21) 8-56 zw./cal Number and range of feeds 0.07-0.4mm / rev Top slide travel range 70 mm Maximum cross slide travel 135 mm Maximum travel of the longitudinal slide 650 mm Maximum tool size 16 x 16 mm Feed the tailstock sleeve 60 mm Tailstock taper MK2 Handle size 125 mm Spindle motor 1.1 kW L / W / H 1,350 x 560 x 1,250 mm Weight 170 kg Fedpfx Acsvvlxle Njfu

Year of construction: 1983, condition: refurbished (used), Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute, Year mod 1983. Dimensions 690 x 185 cm H 180 cm. Ffsdpfxeifpz Ie Ac Nju

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: BMT 65 Ffjdpfx Acoxdc Suo Nou Equipment: Chip conveyor Electronic handwheel

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 Fodpfxof Nku Rj Ac Njfu The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Ffodpfx Acjuqacke Nsu

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm Fsdpfehzbipsx Ac Nefu - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm air pressure 6 - 8 bar working area Radius 1000 mm weight of the machine ca. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. Fedpfsfg U Smex Ac Nofu - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! optional: - Clamping table with T-slots clamping surface 900 x 600mm

Condition: excellent (used), Year of construction: 1998, CNC Lathe Gildemeister CTX 200 E Year of manufacture: 1998 Heidenhain CNC Control Technical Data: CNC Control: Heidenhain Maximum turning length: 350 mm Maximum turning diameter: 160 mm Maximum bar diameter: Ø 42 mm Tool turret capacity: 12 positions (driven) Maximum spindle speed: 5000 rpm Spindle drive power: 7.5 kW Equipment of the CNC Lathe: Chuck spindle Fedpfxow I Swcj Ac Nefu Driven tools Bar feeder: IEMCA VIP 70 CNC Tool holders and jaws

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, Milling machine retrofitted in 2024 Fodpfoul Txzjx Ac Njfu CNC TNC 530 HEIDENHAIN Distance between columns 1250 mm HSK 63 ELECTROMANDRINO spindle 12.000 rpm INTEGRAL fairing