Section Steel Shear

GEKA HYD 110 A

Condition: used, Used Trumpf 5axis laser for sale / 3d laser for sale Used Trumpf 5axis laser for sale / 3d laser for sale Trumpf TLC Cut 5 Year 2006 Fully serviced twice a year by Trumpf Uk Last service January 2019 New vacuum pump fitted – 28/05/19 Predpfofuah Nsx Af Sjb Hours: Beam on: 14,922 hours Laser on: 59,480 hours 3.2kw Fully serviced. Jigs / cutting beds included. Delivery and installation can be arranged.

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Pjdpfx Aetv Iklef Sorb Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm Predpfxsgyd T Ee Af Ssb max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Pjdpfxeuz If Ne Af Ssrb Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS, PAPER PRESS, FOIL PRESS, BALING PRESS Psdpfslc Du Nsx Af Ssrb Immediately ready for use, good condition Used & good / see photos Model: HSM 500.1 VL Machine No. 6135.244.P Serial No. 220109689 Pressing force 50 tons V 400; Hz 50 kW 7.5 Amps 15.5 Pressing power 6 tons Year of manufacture 2001 More presses in our other offers Item used and good / roughly cleaned (Plug it in and you're ready to go) Dimensions: On request!! Additional photos show further possible uses. All items shown in the photos are also available from us. Price quoted net per piece upon collection from warehouse 47441 Moers Current stock: 1 piece Inspection is expressly offered. More equipment in stock see photos or inquire by phone General: We are offering articles from various acquisitions, which we describe as well as possible and provide informative photos. No further information can be provided about the item. We offer the possibility of inspection on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone appointment. If required, the item can be taken away immediately. Due to time constraints, we can only answer questions about this item if you provide us with a telephone number in your inquiry. Unless explicitly stated, this offer is for USED GOODS. Any packaging may be damaged. Items have been visually inspected and are technically in order as far as possible. All offers are ex warehouse 47441 Moers. If you would like shipping, please contact us to discuss packaging and shipping costs. If you are interested, please do not hesitate to call us. All dimensions are approximate. Errors and omissions in the description are expressly reserved.

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm X-axis travel 1550 mm Prsdpfevli H Sjx Af Sob Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. Prodpfx Afsu Icmhs Ssb *

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste Psdpfsv Sm Ruox Af Sorb • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 1965, groove width 3 - 90 mm drawing length 430 mm working speed 4 - 12 m/min slot-milling length 400 mm return speed 15 m/min total power requirement 5,5 kW Prodpfxetv Iats Af Sob weight of the machine ca. 1,4 t dimensions of the machine ca. 1,3 x 1,7 x 1,5 m • with various honing needles and guidances

Condition: used, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 82 mm, turning diameter over bed slide: 870 mm, overall weight: 4,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 870 Power: 12.5Hp Prsdpfx Afeyc Rylj Ssb Distance between centers: 4,000mm Maximum swing over bed: 870mm Maximum swing in gap: 1,100mm Maximum swing over carriage: 580mm Gap length: 340mm Spindle bore: 82mm Speeds: 18 (16-1250) Carriage width: 620mm Tailstock: Morse taper 5 Includes: - 3-jaw chuck 310mm with internal, external, and soft jaws - Faceplate 700mm - Steady rest (closed type) 360mm - DIN backplate for 330mm chuck - Main faceplate / accessory 500mm - Various gears for different thread types Weight: 4,000kg