Dowel boring machine

Ganner Optima 21/510

Condition: used, workpiece height 20-90 mm device 1: Schleifaggragat device 2: Fräsaggregat Podpfxoyb Sdcj Ahyspr device 3: Profilschleifaggregat Automatic edge processing machine Rehnen type KBA for the automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise sanding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for joineries, furniture making and industrial woodworking. Includes replacement sanding belts and cutters. Unit 1: Sanding unit, oscillating Unit 2: Milling unit, top and bottom Unit 3: Profile sanding unit Accessories: For edges R5

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system. Ppjdoxnlfljpfx Ahyor

Condition: used, Storage location: Sonnefeld Pedeway Dcspfx Ahyspr

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Features and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and from the end face - Swivel: 0-90 degrees, adjustable by handwheel - Pneumatic material clamps: 3 pcs - Clearance: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a variety of stops (see pictures) Availability: short notice Pjdpfx Ajxwz Ihohyopr Storage location: Röllbach

Condition: used, Year of construction: 2021, functionality: fully functional, The automatic edge banding machine WDN0004 is designed for the hot processing of pre-glued edge bands for finishing straight and contoured panels. Thanks to this technology, the thickness between the edge and the panel is practically eliminated, resulting in an excellent finish. Quick setup and commissioning: the machine is ready for operation in just 2 minutes. Manufactured by the Italian brand Freutek, the unit features a scratch-resistant work surface and a robust sheet metal frame, and comes equipped with an automatic feeder. Dual scrapers ensure a clean, glue-free finish. The machine is fitted with automatic edge banding on both the front and rear sides. Additional rollers on the work surface ensure optimum pressing pressure of the panel against the glue unit. A powerful 3.59 kW motor provides the necessary performance. The Freutek WDN0004 offers maximum protection against burns during processing and is equipped with an adjustable-height edge guide, a rubber infeed roller, double flat scrapers on both panel sides, and an edge cutter. Edge thickness: 0.4–2 mm. Panel thickness min./max.: 12/43 mm. Feed speed: 7 m/min. Pjdpey Er Epjfx Ahyopr

Condition: excellent (used), functionality: fully functional, Masterwood K29S multi-spindle drilling machine Ppjdpsy Atycsfx Ahyer Number of spindles: 29 Speed: 2800 rpm Distance between first and last drill bit: 896 mm Number of pneumatic clamps: 4 Distance between spindle centres: 32 mm Max drilling depth: 80 mm Operating pressure: 6 – 7 bar Motor power: 3kW Technical documentation