Used Flow Flow Mach 100 for sale (45,584)

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Nsdpfx Afjhw Nfqj Sowl Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment Nwsdpfx Aox Sz A Rjf Ssl • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) Nwedpfx Afozwpfho Sel An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Year of production: 2013 Working area: 3000x2000 Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Location: Croatia Nwodpfxswmcmtj Af Sol Parity: EXW Belišće

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Nedpjyz Dhzsfx Af Sowl Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Nwsdpfx Asy Urzijf Ssl Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Nsdpfx Afex D Rxpo Sjwl Application Types Cutting

Year of construction: 2022, operating hours: 200 h, condition: excellent (used), functionality: fully functional, travel distance Y-axis: 269 mm, machine/vehicle number: 1111127689, Equipment: sliding door, Hello, the machine is in perfect condition. Njdeyfrucspfx Af Sswl For more information, please contact me via email.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series Oi-MB, total height: 2,200 mm, total width: 2,500 mm, table load: 850 kg, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,200 mm, number of axes: 3, This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details. Nsdpey T R Hbjfx Af Sewl • Rotary table: No • Table size: 1200 x 600 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request. Nwjdpfxezhkmuo Af Sjl

Condition: excellent (used), MASTERWOOD TF 100 machining center with tool changer - used Continuous processing, Air table at the work area, Hardened, dust-protected prism guides, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Central lubrication (manual), Sensor for panel measurement ----- Technical data ----- Min. workpiece length X: 250 mm, Min. workpiece length Y: 80 mm, Min. workpiece thickness: 10 mm, Max. workpiece length X: unlimited mm, Max. workpiece length Y: 1,000 mm, Max. workpiece thickness: 60 mm, Nsdpfx Afoz Dh Tuo Sjwl Operating system: Windows 11, Machine control software: Masterwork MW310, Main spindle motor power: 3.3 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle mount: ISO 30 taper, Drilling unit motor power: 1.7 kW, Number of vertical drilling spindles: 10 pcs, Number of horizontal twin drilling spindles in X direction: 2 pcs, Number of horizontal twin drilling spindles in Y direction: 1 pc, Saw blade diameter of saw unit: 125 x 20 mm, Number of tools in tool changer: 4 pcs, Required air flow rate: 2,000 m³/h, Compressed air connection: 8 bar, Dimensions (LxWxH): 1,990 x 2,410 x 1,510 mm, Weight: 1,300 kg Quality information: - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: like new (used), Year of construction: 2023, operating hours: 68 h, Struers Discotom-100 – 2023 – only 68 operating hours – Struers warranty For sale: Struers Discotom-100, a professional, automatic laboratory cutting machine designed for the precise preparation of samples for metallographic analysis. Nwjdezx Hq Dspfx Af Sol The unit is from 2023 and is in very good condition. The machine has been used very little – the counter shows only 68 total operating hours. Key features: * Manufacturer: Struers * Model: Discotom-100 * Year of manufacture: 2023 * Operating hours: only 68 * Condition: very good, practically unused * Warranty: 12 months Struers warranty * Automatic, programmable cutting * Control of feed and sample positioning * Movable X/Y work table * Large working chamber for cutting larger and irregular parts * Adjustable blade rotation speed * Cooling system during cutting * Enclosed working chamber cover with a large window * Clear control panel * Designed for the precise cutting of metals and other materials before further metallographic preparation The Discotom-100 is a high-quality device used in quality control laboratories, materials laboratories, R&D departments, and in the metallurgical, automotive, and manufacturing industries. A major advantage of the offered unit is its very low operating hours – only 68 – and the one-year Struers warranty, which makes it an attractive alternative to purchasing a new machine. Delivery possible in January 2027.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Njdjzmapvjpfx Af Sowl Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Nwedpfx Afezdtquj Ssl Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Nwodpfezr H Aajx Af Sjl Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: good (used), Year of construction: 2007, For sale full packing system, Nwodpfjk R T Uvox Af Ssl Multihead ( 10 scales) Packing machine Conveyor for packaged products.

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 4052, Horizontal flow pack packaging machine sold with: - Conveyor - Labeling machine - Inkjet printer Very little used, in excellent condition. Nedpfx Aey A Hf Ssf Sswl ALL WRAP RCN270 packaging machine, year 2012 Linear speed: up to 25 m/min Bag width: from 30 to 270 mm Bag length: from 50 mm to unlimited Product height: up to 25 mm Production rate: up to 150 cycles/min per lane Reel diameter: 400 mm (standard) AVERY DENISON labeling machine, type ALX 734LH: Print speed: 50 to 400 mm/s Max print width: 104 mm Ribbon width: 20-140 mm Label output: up to 400 labels Label width: 30 to 134 mm Label length: 25 to 225 mm Core diameter: 38, 76, 102 mm Roll diameter: 300 or 400 mm DOMINO A320i inkjet printer Conveyor: Conveyor belt width: 100 mm Conveyor belt length: 2000 mm Dimensions: 2000x595 H 1240 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: A-250101, total length: 4,600 mm, total height: 1,800 mm, total width: 1,250 mm, input voltage: 230 V, overall weight: 650 kg, compressed air connection: 4 bar, warranty duration: 3 months, input current: 6 A, roll width: 680 mm, pipe diameter (max.): 76 mm, product height (max.): 120 mm, product height (min.): 25 mm, product length (max.): 550 mm, product length (min.): 100 mm, Item A250101 – Record Jaguar 88 Flow Pack Machine For sale: Used Record Jaguar 88 flow pack packaging machine. Product flow direction: Left to right Machine finish: Painted Nwjdpfx Aez Er Nvjf Sjl Machine Specifications: Overall machine length: 4.6 metres Machine width: 1.2 metres Overall machine height: 1.8 metres Working height: 0.85 metres Usable infeed conveyor length: 2.0 metres Usable outfeed conveyor length: 0.5 metres Flight distance: 400/800 mm Machine capacity: 3,600 packs per hour Machine Connections: Power supply: 230 V N + PE Connected load: 3.2 kW Plug type: CEEform, 5-pin, 16 A Compressed air: Yes (the machine can also operate without compressed air) Machine Features: • Independent temperature control for the cross-sealing unit and longitudinal sealing rollers • 1 set of pulling rollers • 1 set of sealing rollers • 1 set of folding rollers for the longitudinal sealing seam • 1 set of sealing knives, 270 mm wide • Passage height of the cross-sealing unit: 150 mm • Safety coupling in the cross-sealing unit • Flight distance: 400/800 mm • Two-speed control of the flights • Fixed forming shoulder • Maximum film width: 600 mm • Top chain with flights • Mechanical film-length adjustment • Pneumatic product pushers • Mechanical adjustment of cross-sealing speed • Rotating control panel • Machine mounted on wheels for mobility, with adjustable feet • Electronic speed control via potentiometer • Additional 230 V socket • Equipped with a hot foil printer for printing the date on the film • Pneumatic opening and closing of the sealing rollers • Usable infeed conveyor length: 2,000 mm • Usable outfeed conveyor length: 500 mm • All parts that come into contact with the product are made of plastic or stainless steel The machine is particularly suitable for tall and/or long packages.

Condition: refurbished (used), Year of construction: 2011, operating hours: 15,620 h, functionality: fully functional, center width: 1,400 mm, center height: 500 mm, center height in crank: 500 mm, spindle motor power: 30,000 W, total length: 4,560 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 2,200 rpm, quill diameter: 70 mm, quill stroke: 750 mm, feed force X-axis: 65,000 N, feed force Z-axis: 65,000 N, feed length X-axis: 310 mm, feed length Z-axis: 600 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, power: 45 kW (61.18 HP), warranty duration: 12 months, The machine is in very good condition and has been completely overhauled by us. We offer a 12-month warranty. Nsdpfx Aozluh Rof Sewl We would also be happy to provide installation, commissioning, and training services. Training in metal forming or product development is also available and offered separately. The machine is equipped with a Sinumerik 840 D CNC control system, including playback software.

Condition: used, Year of construction: 2001, MACH MIND VMC 1000 - A MACHINING CENTER CNC FANUC SERIES O – MD TABLE SIZE: 1,200 mm x 600 mm MAXIMUM ALLOWED TABLE LOAD: 850 KG TRAVELS: X: 1,020 mm Y: 610 mm Z: 610 mm MAX. DISTANCE TABLE – SPINDLE: 135 – 745 mm SPINDLE TAPER: BT 40 Nwedpfeyuqapox Af Sel SPINDLE SPEED: 60 – 8,000 RPM TOOL MAGAZINE: 24 POSITIONS CHIP COLLECTION TANK WEIGHT: 6,000 KG COMPLETE WITH FULL DOCUMENTATION YEAR: 2001

Condition: used, Macmon M 100 E – Universal milling machine -Travel ranges X / Y / Z: 310x340x170 mm -Spindle speed range: 50 - 2500 rpm -Automatic feeds and rapid traverses in all 3 axes -Tool holder: ISO 40 -Swiveling vertical head -Tilting table: 600x220 mm -Total power consumption: 2.5 kW -Documentation Nwodpfszzymqjx Af Sel Dimensions: L x W x H: 1.5 x 0.7 x 1.5 meters / Weight: 900 kg Errors and omissions excepted.

Condition: used, This listing is for Quattro Fluid SystemFlow 1000S Nwjdpfsxhfp Rex Af Ssl The unit is in full working condition and ready for immediate use This four-piston quaternary diaphragm pump offers gentle, low-pulsation fluid transfer ideal for delicate biological materials, proteins, and cell suspensions in bioprocess applications

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price. Njdpfez D Dxgjx Af Sjwl

Year of construction: 2025, operating hours: 20 h, condition: like new (used), functionality: fully functional, Automatic Horizontal Flow / Pillow Packing Machine – Transparent Packaging Film Included – Excellent Condition The machine was purchased new in late 2025 from Anhui Dixin Machinery Technology Co., Ltd. specifically for our premium protein bar production operation. It has had very limited commercial use, is fully functional and in excellent condition. As a horizontal flow/pillow packing machine, it may also be suitable for: Protein bars, Energy and nutrition bars, Chocolate and confectionery, Snack bars, Biscuits and cookies, Bakery products, Other regularly shaped solid food products. The transparent film is included in the advertised price at no additional charge. Condition - Purchased new in late 2025, Very limited commercial use, Used in our dedicated food-production facility, Clean and well maintained, Fully functional, Excellent overall condition. Inspection & demonstration The machine is currently located in Wimbledon, London, United Kingdom. Available immediately. Nwedpfozy Abnsx Af Sol Inspection and demonstration can be arranged in London. We are selling also selling other equipment from our complete premium protein-bar production facility, including: Chocolate enrober with 30kg chocolate tank & 2.7m refrigerated cooling tunnel Protein/energy bar extruder and pneumatic cutter 60L Commercial chocolate melanger/refiner Commercial planetary mixer Stainless-steel production tables, sinks, racks and other food-production equipment Machines are available individually, or we can discuss a package price for multiple machines / a wider protein-bar production setup. Delivery: EXW Wimbledon, London, UK. Collection, loading, transport and installation are to be arranged by the buyer unless otherwise agreed.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 21A10, total length: 3,120 mm, total width: 700 mm, total height: 1,930 mm, overall weight: 600 kg, input voltage: 380 V, type of input current: three-phase, power: 5.5 kW (7.48 HP), Flowpack packaging machine for packaging with PPL reels, equipped with a die for euroslot hole on the sealing and cutting unit. Njdpfx Afexmkpgo Sewl