Column drilling machine

FLOTT 15/ST

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed Hjdehx E T Hopfx Ah Njng -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min Hnedpfxoz N Ams Ah Nog forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 160 mm spindle taper MT 4 MK table: 500 x 420 mm Hnodofv H H Hepfx Ah Njg column diameter 120 mm turning speeds 85 - 1800 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 0,85 / 1,5 kW weight of the machine ca. 500 kg. range L-W-H 965 x 515 x 1920 mm

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Hnodpfx Aeda Nqxjh Nsg Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Hnsdpfx Aevgmbveh Neg Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Hnsdpfetuyr Iex Ah Nsg Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: used, High-lift pallet truck, pedestrian stacker, manual hand pallet stacker LOGITRANS type LF 1001 / 1600 Tool lifter Serial number: 051E04006100 Year of manufacture: 2005 Hnsdpfx Ahodz Spmj Nog Load capacity: 1000 kg Lift height: 1600 mm Fork length: 600 mm Platform size: 800 x 650 mm Overall length: 1200 mm Overall width: 800 mm Height: 1930 mm - Lifting via mechanical lift hydraulics, pump action using the tiller arm - 2 lifting speeds: approx. 36 strokes to lift to 1600 mm, or approx. 10 strokes for 10 cm lifting height. - Manual movement by pushing - Fork lifting in single mast with free lift Own weight 198 kg Very good condition

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm Hnjdpfswd Ii Usx Ah Nsg - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Year of construction: 2022, condition: new, angle: 0° - 90° Hnodpsi Ezr Nefx Ah Nsg max cutting length: 1370 mm

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, milling spindle length: 150 mm, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Hnodpfx Ahjwcpqqs Nsg Mill arbor with 40 mm diameter and 150 mm length