Measuring arm

FARO Quantum

Condition: used, Year of construction: 2019, Manufacturer: FARO, Type: Quantum 21000, Year of manufacture: 2019, Serial number: W25-M5-19-19502, 7 axes, Reach 2,500 mm, Single Point 0.0270 mm, 38µm, PC evaluation unit, including measuring table (custom-built), mobile, dimensions approx. 1,000 x 1,000 mm, equipment case made of plastic. Lasdpfxsz Tiyie Albsh +++ ATTENTION: This item is part of an online auction! +++

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition Laodpfx Ajx Hn D Rjlbeh - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2010, functionality: fully functional, repeat accuracy: 0.032 mm, arm reach: 3,000 mm, Equipment: type plate available, Portable articulating arm coordinate measuring machine (CMM) from the Swiss manufacturer FARO, part of the Quantum series, for mobile coordinate measurement directly on the machine or in the production area. Can be used for quality assurance and incoming goods inspection, reverse engineering, CAD nominal-actual comparison, as well as for the alignment and testing of tools and machines on-site. Technical data (according to the nameplate): Manufacturer: FARO, Made in Switzerland Model: Quantum, Rev. 3.0 Serial number: Q10-02-10-25834 Year of manufacture: 2010 Repeatability (Single Point): 0.032 mm Volumetric accuracy: 0.046 mm Last certification: 05/03/2023 Condition: used Scope of delivery: FARO Quantum measuring arm with handheld probe Mounting base USB dongle with FARO CAM2 and PowerInspect software (version and license transferability not confirmed) Two accessory cases and a fabric bag Original hard-shell transport box Note: Temperature compensation as specified, no guarantee. Sold used, as is, without warranty and without the possibility of return. Delivery EXW. Lodpfx Asz Rl Azelboah The measuring arm is located in the Leipzig area and is ready for pickup.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: W25-M5-18-17210, number of axes: 7, The measuring arm was last calibrated in October 2024. The laser scanner was calibrated in April 2024. TECHNICAL DETAILS Measuring system: FARO Quantum M ScanArm Measuring range: 2.5 m Lasdpozx N Rgofx Alboh Axes: 7 Measuring method: Tactile coordinate measurement and 3D scanning Laser scanner head: FARO LLP HD, Revision 3.2 MACHINE DETAILS Application areas: Dimensional inspection, CAD component comparison, first article inspection (FAI), production control, tool and fixture inspection, and reverse engineering Measuring stand height: 750 - 1,000 mm Measuring stand weight: 17.25 kg Reach: 350 mm EQUIPMENT FARO LLP HD laser scanner head, Revision 3.2 Tactile probes MetrologyWorks Kodiak HDP-KCF measuring stand Measuring stand construction: Carbon fiber/aluminum Measuring stand mounting ring: 3"-8 Original FARO transport case Batteries Power supply Cables Mounting accessories Calibration documentation Technical documentation Manual Note: The laptop and PolyWorks software are not included in the offer.

Year of construction: 2015, condition: ready for operation (used), A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible. Lasdpfx Ajxwn I Ujlbeh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: - Calibration kit Lsdpjzxn E Nofx Albjah - Transport case - Mounting plate - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Please contact us if you have any questions.

Condition: like new (used), Year of construction: 2024, bolt circle diameter: 2,500 mm, FARO Quantum X.S Max 2.5m – 2024 + PolyWorks|Inspector Probing A very recent FARO Quantum X.S Max 2.5m from 2024 – complete with ISO 10360 calibration, PolyWorks|Inspector, and training. Are you looking for a high-quality, accurate, and flexible mobile 3D measurement solution? This FARO Quantum X.S Max 2.5m offers a complete solution that allows you to get started right away. The Quantum X.S Max was manufactured in 2024 and is the high-end Max version within the FARO Quantum series. The arm is offered in a probing configuration and is delivered complete with PolyWorks|Inspector™ for tactile 3D measurements and training. Specifications Manufacturer: FARO Model: Quantum X.S Max Year of manufacture: 2024 Measurement range: 2,500 mm Version: 7-axis measuring arm Configuration: Tactile Probing 3 mm iProbe 6 mm iProbe Original transport case FARO Fold tripod Mounting plate Calibration set Power supply/battery and accessories Calibrated according to ISO 10360 The FARO Quantum X.S Max is calibrated according to ISO 10360 before delivery. With this, you will not just receive a used measuring arm, but a professional measurement solution whose performance is checked and documented before delivery. Including PolyWorks|Inspector version 2026 The measuring arm is delivered with PolyWorks|Inspector for probing, which provides you with a powerful and user-friendly software environment for, among other things: Dimensional and geometric inspections GD&T checks Alignments CAD-to-part inspections Graphical measurement reports Digital inspection reports Repeat measurements and series inspections Training included Training is included with the purchase of this complete solution. During the training, the user will receive practical guidance on working with the FARO measuring arm and PolyWorks|Inspector. This allows you to quickly and effectively use the combination within your own measurement environment. Complete measurement solution You will receive: FARO Quantum X.S Max 2.5m + 3 mm & 6 mm iProbe + FARO Fold tripod + ISO 10360 calibration + PolyWorks|Inspector Probing + Training One complete package, so you can start professional mobile 3D measurements right away. Why choose this combination? Very recent measuring arm from 2024 High-quality Quantum X.S Max version Practical measurement range of 2.5 meters Calibrated according to ISO 10360 Including PolyWorks|Inspector Including training Complete hardware and software solution An interesting alternative to investing in a completely new system A complete, professional mobile measurement solution for a significantly more attractive investment than a new one. Lasdpfxozvyxps Alboh Contact us for price, availability or more information.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping Lsdpfoxdiigsx Albjah - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 230 V, bolt circle diameter: 1,000 mm, arm reach: 2,000 mm, Equipment: documentation/manual, A FARO measuring arm is used for precise, portable 3D measurements and quality control across various industries as it enhances the accuracy of traditional measuring methods, reduces errors, provides reliable data for decision-making, and increases efficiency through direct integration with computer-driven processes and software. Why use a FARO measuring arm? Accuracy and Precision: A FARO measuring arm delivers highly accurate 3D measurements, resulting in more consistent and reliable outcomes compared to manual methods. Portability: The arm is portable and can be easily transported and set up at different locations, allowing for flexibility within the measurement process. Quality Control: Ljdpfow U Atbjx Albjah Manufacturers use the measuring arm for 3D inspections, CAD comparisons, and dimensional analyses to verify and ensure product quality. Efficiency: By providing immediate, precise data, the measuring arm helps prevent errors, reduces rework, and streamlines production processes, leading to faster product delivery and higher customer satisfaction. Data for Decision-Making: The collected measurements provide dependable information that can be used for trend analysis and smarter decision-making by the team. Versatility: The measuring arm can be employed for diverse applications such as reverse engineering, tool certification, and inspection of complex geometries, making it a valuable tool in different production sectors.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: X25S52452233, input voltage: 230 V, overall weight: 51 kg, arm reach: 2,500 mm, number of axes: 7, TECHNICAL DETAILS Arm reach: 2,500 mm Number of axes: 7 MACHINE DETAILS Type of input current: Alternating current (AC) Input voltage: 230 V Total weight: 51 kg Arm weight: approx. 8 kg Lodpfxszi Ukts Albeah EQUIPMENT Calibration kit Transport case Mounting plate 3 mm and 6 mm iProbes USB cable Power adapter, 230 V Rechargeable battery FARO Fold tripod Manufacturer's warranty until November 2026 Note: The seller can also offer the machine with FCA terms for an additional charge.

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe Laodpex Szp Djfx Albsh weight of the machine ca. 600 kg dimensions of the machine ca. 1300 x 1000 x 2400 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, warranty duration: 3 months, OFFER FARO QUANTUM 2.5E + SCAN HD Laedpfxsvvt N Ej Albeh Quantum E 2.5m 7 Ejes Serial No W25-E5-17 Model 2100 Volumetric 50m Quantum M 2,5m 7 axis includes Arm with Bluetooth and Wireless technology, calibration kit, base, plate, 3mm probe, 6mm cables, heavy-duty case, rechargeable bat Polyworks inspector Standard Package, the universal 3d metrology software platform for dimensional inspection, node-locked license. 2023 (no Mantenimiento) Calibración ENAC, basado en la norma ISO 10360-12:2016 Opcional 8 AXIS + POLYWORKS 2023 + TRIPODE

Condition: like new (used), Year of construction: 2024, functionality: fully functional, FARO Quantum M Max 3.0m – 7-axis measuring arm for sale incl. Polyworks We, R+S Metallbearbeitung & Lasertechnik GmbH & Co. KG, are selling a FARO Quantum M Max 3.0 m 7-axis FaroArm, 6th generation. Features - FaroArm Quantum M Max, 3.0 m, 7 axes - Bluetooth and Wi-Fi technology - Calibration kit - Mounting plate - iProbes (3 mm & 6 mm) - USB cable & power supply - Robust transport case - 1 rechargeable battery Additionally: - Magnetic Mount G3+ (150 mm) Lajdpfx Aow R Tk Nelbsh - iProbe adapter (M4 thread) - Software: Polyworks incl. IGES & STEP - "Complete Care" service plan valid for 5 years (maintenance, calibration & repairs) (4 years remaining) Location: 32130 Enger, Germany If you are interested or have any questions, we look forward to hearing from you.

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) Lsdjxy S A Iepfx Albjah - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-M5-22-48408, repeat accuracy: 0.004 mm, number of axes: 7, The new price of the machine in 2023 was €48,700! TECHNICAL DETAILS Number of axes: 7 Arm length: 2.5 m Repeatability: 0.0042 mm Volumetric accuracy: 0.054 mm MACHINE DETAILS Calibration date: 03.2023 Operating temperature range: 10 °C – 40 °C Operating humidity: 95% (non-condensing) Laodpfx Aloyqwgbjboh Operating voltage: 100 – 240 V AC Frequency: 47/63 Hz Notes: Without CAM2 probe/touch Professional license Specifications, information, and technical data are provided by the manufacturer; therefore, no guarantee can be given by the seller.