Coordinate measuring machine

FARO Quantum M Max 2.5m 7 Achsen FaroArm

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg Iaedpfx Asl Tuvdsqusu -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters - Eurotherm Nanodac controller/recorder with color touch display - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity - Electrical schematic with spare parts list Iaedpfxov Hg Eus Aquou Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven.

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, Description BAISON V52U(12+12 meters): (12 or 20 kW) FOUR-CHUCKS HEAVY-DUTY TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND UNLOADING SYSTEM 12 meters automatic loading system + 12 meters automatic unloading system (can be equipped in different configurations ex:12+6 meters) This machine is also for profile, tub and different shape. Tube size range: Round tube: φ50-φ500mm Square tube: □50*50-□500*500mm Channel Steel: 5#-50# Angle Iron: 200*200mm I-beam:10#-50# H-beam:100*100mm-500*500mm Laser Power 12.000 W (Raycus) Max. Single Tube Weight 2.000 kg Claw Stroke Full stroke Min. Tail Length 0 mm Max. chuck speed 40 r/min Max Speed 50 m/min Max Acceleration 0.4 G Max. Tube Cutting Length 12.000 mm Ultra-short Tail Material 0 mm X-axis 500 mm Y-axis 12.000 mm Z-axis 500 mm Positioning Accuracy (X/Y) ±0.05 mm/m Repeated Positioning Accuracy (X/Y) ±0.05 mm Power Data 130kw / 225A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 29.080*5.000*3.250 mm Machine Weight 28.165 kg(Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 12 kW Laser head with automatic focus – RAYTOOLS BS12K-3D Controller system – FSCUT 5000A Automatic self-centering pneumatic chucks Semi-automatic loading system with chain Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – K.H Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Complete CE standard - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) Iajdpfx Aqevcbw Deusu - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm Iajdpfxex Dda Tj Aquju voltage 26,8 V total power requirement 26,8 kW weight of the machine ca. 0,040 t

Condition: used, Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Iedpfxomhm Elo Aqusau Mechanical rear roller conveyance Emergency stop switch Conical rounding possible

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, type of input current: AC, overall weight: 1 kg, For sale: ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industrial and research applications, especially when components need to be measured in challenging environments. Fast application, easy operation. Ijdpfx Aew Swplsquoau Condition: Lightly used, predominantly for trade shows, exhibitions, and training purposes only. Scope of delivery: · T-Scan Hawk 2 Lite · Class 2 blue laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) · Sensor cable · Transport case · Acceptance test in our facility with calibration bars in accordance with ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · CAD comparison with colored deviation display · Dimensioning and geometric tolerancing analysis according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration · Guided user calibration · Data acquisition and project management · Configurable workflow assistant · Switching measurement modes and setting exposure time directly on the sensor · Automatic sensor calibration monitoring · Pre-capture of reference points with graphic support · Real-time display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging upper and lower surfaces · Removal of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g., G3D format, STL format) Note: The device was exclusively used for demonstration, training, and exhibition purposes, so some signs of use are visible. If required, we can provide a suitable laptop for an additional charge. 3D acceptance certificate available. We are also open to trade-in of older GOM systems upon purchase of the T-SCAN Hawk 2.

Year of construction: 2014, condition: ready for operation (used), A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Ijdpfswi Tntjx Aqusau

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 12 Ratings ✈️ Shipping : 3-4 weeks ✈️ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✅✅✅Energy class A+++✅✅✅ ⭐Offer Price €6,220 EXCL. VAT & SHIPPING ⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time 3-4 weeks❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨ Strong ✨ Economical ✨ Efficient ❗❗❗The fastest delivery time! Go direct from the manufacturer❗❗❗ ►►►PROTON - WETLINE EX paint booth - VENTILATION CHAMBERS◄◄◄ ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER : 0.55 KW/H ✔️ FAN PERFORMANCE : 8000 M3/H ✔️ CARTON FILTER AREA : 2.6 m2 ✔️ FIBERGLASS FILTER AREA : 1.44 m2 ✔️ PANEL FILTER NUMBER G3: 2 PCS ✔️ PANEL FILTER AREA : 1.7 m2 ✔️ PRESSURE GAUGE : YES ✔️ MOTOR CONNECTION : BELT CONNECTION ✳️CABIN SOLUTION FOR LOW COST✳️ Iajdpjc Uthxsfx Aquou Exhaust/supply pods are ideal for converting an area in your factory for spray painting. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We have designed a variety of exhaust/supply chambers to meet your finish requirements while minimizing your footprint. Our exhaust/supply chambers share the same design features as our large industrial booths. ✳️ECO-FRIENDLY✳️ Each supply chamber meets safety and code requirements - NFPA-33, IFC to protect those working in an industrial spray environment and the environment outside. Their extraction/supply chamber is designed to efficiently remove overspray from the painting process while maintaining an even flow of air throughout the work area. ✳️FLEXIBLE AND ADAPTABLE ✳️ You will find that our chambers can be designed for both types of care. Supply Chambers are supplied with exhaust fan and motor as a package, with Supply Chambers specifically designed to accommodate an Air Supply Unit ✳️CNC AND CAD TECHNOLOGY✳️ Panels are made from Premium 1.5 - 2.0mm. Galvanized G-90 steel and precision stamped on m5 centers allowing for easy installation of nuts and bolts and it has reinforced construction to support the fan placed on top. ✳️QUIET EXHAUST FANS✳️ Typically operates at low dBa noise levels below OSHA limits ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 174 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 2,405 mm, fuel type: electric, mast type: duplex, construction height: 3,500 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Iasdpfjq E A Uzox Aquju Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25 x 15 Rear tires Type: Superelastic Rear tires Size: 8.25 x 15 Battery Volt: 80V Battery Ah: 1120Ah Battery year of construction: 2022 Description: Fork positioner, sideshift, Kalmar comfort cab with heating and air conditioning, radio, battery 80 V / 1120 Ah - Nexsys - MAINTENANCE-FREE, charger, 2 LED work lights at the front on the lift mast, 2 LED work lights at the front on the roof, 2 LED work lights at the rear on the roof, indicators at the front and rear, reversing camera, safety light, safety light, rear lights at the front and rear. rear, Rear view camera, Safety-Light, Rear view mirror, Fork positioner, Sideshift, Kalmar comfort cabin with heating and air conditioning, radio, Battery 80 V / 1120 Ah - Nexsys - MAINTENANCE FREE, charger, 2 LED work lights at the front of the lifting mast, 2 LED work lights at the front of the roof, 2 LED work lights at the rear of the roof, Turn signals front and rear, backup camera, Safety light, Rear view mirror, Sideshift, Fork positioner, 3rd valve, 4th valve, air conditioning, scales,

Condition: excellent (used), Control switch Make DEMAG Type DSE 10 C/CS Isdpsf Ezbtjfx Aquoau Documents available