Vertical machining center

Fanuc Robodrill Alpha-D21LiB5

Condition: like new (used), Year of construction: 2017, operating hours: 3,800 h, functionality: fully functional, Controller FANUC 31i Model B5 Table size 850 x 410 mm Max. table load 300 kgs X travel 700 mm Y travel 400 mm Z travel 330 mm A axis C axis 0 - 360 degree Distance between table surface and spindle end 250 - 580 mm Max. tool length 250 mm Max. tool diameter D80 mm Max spindle speed 24000 rpm Rapid speed X/Y/Z 54 m/min Feedrate 30 m/min ATC magazin 21-fold Tool holder type BBT30 Weight 2300 kgs Accessories, featureies - 4/5 axis with round table - RENISHAW TS27 tool presetter system - RENISHAW OMP60 zero point setting system - Chip conveyor - Coolant unit - Manuals Ndsdpfx Aextwxhsbgod The machine has been used little and the condition is like new. Ready to buy.

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 0i-TF Turning diam. : 580 mm Turning length : 3250 mm Mainspindle: Technology:Belt-driven spindle with Gearbox Speed:1.000 rpm Power (max.):45 kW Torque (max.):4.008 Nm Barcapacity:205 mm Workpiececlamping I:3-Jaw chuck, Autogrip AP-230 ø535 mm Workpiececlamping II:Manual 3-Jaw chuck, Chandox SK20 (Rearside Spindlehead) Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:BMT 75 Tooldrive:3.000 rpm, 7 kW, 83 Nm Movement in X/Y/Z:340/160/3.250 mm Rapid travers in X/Y/Z:20/7/12 m/min Tailstock: Technology:Towed tailstock with programmable Sleeve Stroke:150 mm Cone:MK5 Equipment/Accessory: Chipmanagement:Chipconveyor Coolingmanagement:Coolant pump Ndsdpfx Aewt Iwqobged Toolmeasurement:Measuringarm, Renishaw RP3 Oilmistseparation:Mechanical extraction, AR Filtrazioni ARNO 3VF YF Shaftprocessing:Manual Steady rest, ø150-300 mm Toolholder:Misc. static and driven toolholder Setup operations:Electronic Handwheel Further Equipment:Automatic Door (pneumatic), Trafo, Oilskimmer Further Accessory:Misc. Jaws and EWS Quickchangeinserts

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand FANUC Model 31i model B5 Main Drive Number of axis 4 Movement X-Axis Movement 700 mm Njdpfx Abexpyxvegodd Y-Axis Movement 400 mm Z-Axis Movement 330 mm Workpiece Workpiece weight 300 kg Table Outer length 850 mm Outer width 410 mm Tools Slots in storage 21 Additional Equipment Chip conveyor: A carpet This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, A CNC drilling and tapping center Fanuc is available. Travel X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 250mm-580mm, axes: 5, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle taper: BT30, speed: 24000rpm, power: 26kW, torque: 35Nm, rapid traverse: 54m/min, feed rate: 30m/min, tool positions: 21, max. tool diameter: 80mm, max. tool length: 250mm, positioning accuracy: +/-0.006mm, repeatability: +/-0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 2100kg, control: Fanuc, operating hours: 25320h. Including coolant tank MCO with band filtration system and scraper conveyor, M&H 3D probe, Fanuc zero-point option, and spare spindle. Documentation available. An on-site inspection is possible. Expected to be available starting December 2026. Ndedpfxexlitzj Abgod

Year of construction: 2011, operating hours: 23,747 h, condition: ready for operation (used), General Data Machine weight 5650 Control Unit Brand FANUC Model 31i Model A Main Drive Spindle speed range 6000 Spindle motor power 11/7.5 kW Nodpfown N Rbox Abgjdd Turret Number of turrets 2 Number of tool slots 12 Media Chip conveyor Yes Additional Equipment TOP AUTOMAZIONI FU 342 bar loader This 3-axis NAKAMURA-TOME WT-100 was manufactured in 2011. It features a CNC FANUC 31i Model A, turning length of 503 mm, and a maximum turning diameter of 190 mm. The machine includes two motorized turrets with 12 tools each, a bar capacity of 42 mm, and a TOP AUTOMAZIONI FU 342 bar loader. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME WT-100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power Ndsdpfev T Np Aex Abgjd chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: used, Year of construction: 2017, Doosan Puma 2100LY CNC lathe with Y axis Year of manufacture: 2017 Fanuc i Series with Manual Guide Max turning length: 760mm Max turning diameter: 406mm Chuck: 210mm Samchully Spindle bore: 65mm Tool turret: 12/24 BMT55 Axis travels: X axis – 260mm Z axis – 830mm Y axis – 105mm Tailstock Ndodjw E Iwuopfx Abgjd Renishaw probe Included with the machine: - 2 driven tool holders 1/1 - 8 standard tool holders - LNS chip conveyor - Coolant tank with pump - Machine documentation Low operating hours, very good condition

Condition: excellent (used), Year of construction: 2014, operating hours: 2,315 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 400 mm, turning diameter: 320 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 50,000 rpm, spindle bore: 75 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, total height: 1,700 mm, total length: 2,630 mm, chuck outer diameter: 210 mm, total width: 1,700 mm, bar diameter (max.): 66 mm, quill stroke: 500 mm, swing diameter over cross slide: 660 mm, spindle nose: 6, overall weight: 4,500 kg, MAZAK QUICK TURN 200 Smart Operating hours: Automatic cycle: 2,330 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: D 660 mm Max. turning diameter: D 350 mm Max. bar capacity: D 66 mm Max. machining length: 520 mm Main Spindle Max. spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Nedewzkzzjpfx Abgedd Travel (X / Z): 180 mm / 550 mm Tailstock Mount: MT NC axis, pressure via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flushing General Specification: - SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) - Mazak standard colour - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed live center mount - Operator door with interlock switch - Double foot switch - Fully enclosed work area - Work area lighting - Safety features compliant with global standards - Complete coolant system - Chuck condition monitoring - Automatic Tool Eye - 10.4" color screen - EIA/ISO package - LAN interface - Standard tool set

Condition: ready for operation (used), max. wheel diameter 150 mm Ndodpfxsvzhg Ns Abged gear width 1 - 200 mm max. module 4 min. module 1 control Sinumerik 840 D table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system and workpiece magazine.

Condition: good (used), Year of construction: 2009, functionality: fully functional, We offer: Universal Machining Center Manufacturer: Deckel Maho Type: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Technical specifications: X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Center bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: Njdpfx Abevx Tmcogodd - Internal cooling Accessories: - Chip conveyor - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!