Jcb 1 cx for sale

Your location was not identified (Edit)
Enter your address
or
Move
4
2017 JCB 3CX P21 ECO Turbo Powershift Sitemaster Backhoe Loader, Piped c/w Torque Lock, Extendahoe, 4in1 Bucket, Bucket, Forks (Copy of Declaration of Conformity Available) Nn9wl This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, DE on 4th – 6th September at 8.00am CET. To view full inventory go online. more
15
JCB 1CX-Operating Weight: 2790 kg, Engine: PERKINS ENGLAND 404 C 22, engine power: 36, 3kw/2800rpm 49HP, CHARGER: Hydraulic connection on the charging arm; Maximum hydraulic load: 2350 kg, nominal operating load: 600 kg, standard bucket capacity: 0.28 m3; Max lifting height of the loader arm: 2.59 m; Max dump Height: 2.10 m EXCAVATOR: Hydraulic connection on the kick arm maximum digging depth – 2.55 m, maximum digging radius 3.38 m; Maximum dumping height 2.35 m, maximum arm breaking force 14.88... more
4

Backhoe Loader JCB 3CX-14

More Jcb 3 Cx
Dormagen, GermanyGermany
18065 km
2017
excellent (used)
2017 JCB 3CX-14 Turbo Powershift Sitemaster Backhoe Loader, Piped c/w Torque Lock, A/C, Extendahoe, 4in1 Bucket, Bucket, Forks (Copy of Declaration of Conformity Available) Bfgkn8kuwj This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, DE on 4th – 6th September at 8.00am CET. To view full inventory go online. more
15
JCB 1CX-Operating Weight: 2790 kg, Engine: PERKINS ENGLAND 404 C 22, engine power: 36, 3kw/2800rpm 49HP, CHARGER: Hydraulic connection on the charging arm; Maximum hydraulic load: 2350 kg, nominal operating load: 600 kg, standard bucket capacity: 0.28 m3; Max lifting height of the loader arm: 2.59 m; Max dump Height: 2.10 m EXCAVATOR: Hydraulic connection on the kick arm maximum digging depth – 2.55 m, maximum digging radius 3.38 m; Maximum dumping height 2.35 m, maximum arm breaking force 14.88... more
4

Backhoe Loader JCB 3CX P21 ECO

More Jcb 3 Cx
Omagh , United KingdomUnited Kingdom
18296 km
2016
excellent (used)
15-16 JCB 3CX P21 ECO Turbo Powershift Backhoe Loader, QH, Piped, SRS - Choice Bfex8vfx37 This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 28th – 30th August. For more information go online. more
4

Backhoe Loader JCB 3CX P21 ECO

More Jcb 3 Cx
Leeds, United KingdomUnited Kingdom
18296 km
2016
excellent (used)
15-16 JCB 3CX P21 ECO Turbo Powershift Backhoe Loader, QH, Piped, SRS - Choice Ysixn9kj This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 28th – 30th August. For more information go online. more
8

- USED - 3-AXIS CROSS TABLE VERTICAL MACHINING CENTRE  FAMUP MCX 1000

Matelica (MC), ItalyItaly dealership location
17814 km
2002
ready for operation (used)
X-AXIS TRAVEL: 1000 mm Y-AXIS TRAVEL: 585 mm Z-AXIS TRAVEL: 615 mm RAPID FEEDS X-Y-Z: 24 - 24 - 24 m/min SPINDLE: 50-8000 rpm; 15-18,5 Kw; ISO 40 - DIN TABLE SIZE: 1100 x 510 mm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: FANUC 21i MB WEIGHT: 6000 Kg Be9e8lnpai ACCESSORIES: PCMCIA SERIAL PORT; RS 232 SERIAL PORT; PORTABLE HANDWHEEL PRICE: On demand more
8

Injection moulding machines Krauss Maffei KM 160-750 CX

Kaiserslautern, GermanyGermany dealership location
18085 km
2013
ready for operation (used)
General Data Measurements width 4920 mm Measurements depth 1600 mm Measurements height 2100 mm Machine weight 8200 kg Injection Unit Screw diameter 50 mm Stroke volume 250 cm3 Injection pressure 2500 bar Clamping Unit Clamping force 1600 kN Bevnwnn023 Media Internal cooling Yes This Krauss Maffei KM 160-750 CX Injection Moulding Machine was built in 2013 in Germany and has never been used. Operated through a Krauss Maffei control unit, this machine can work with a clamping force of 1600 kN... more
5
Cutting force 30 to Y-axis workspace 2000 mm Delivery promptly, subject to prior sale Punching power: 30 to Work area: 2,000 + R x 1.000 mm maximum speed: ~ 200 1/min Table: 3.980 x 1,420 mm (incl. extension front 500 mm) maximum sheet thickness: 6 mm Matrices / stamp change: 10-15 sec. Motor: 4 kW Achsenpositioniergenauigkeit: +/-0.1 mm Axis speed: 30/40 m / min Oil filling: 140 lt Length: 4.000 mm Width: 2400 mm Height: 1800 mm Weight: 4,000 kg CNC control with graphical Anzei... more


jcb 1 cx
daily

New machines via email!

Stay updated!
7

Injection moulding 101 - 200 ton. KRAUSS MAFFEI KM 160/1000 CX

Cerreto D'Esi, ItalyItaly dealership location
17814 km
2011
ready for operation (used)
Tonnage:160 Clearence between tie-bars:520x520 mm Screw diameter:55 mm Calculated shot volume:522 cm3 Min/Max mould thickness: 300/650 mm Robot connection Euromap-12:Yes Core pull: 1 Mov. plasten stroke: 950 Air ejection: Bfae9r0ily 5 Akkumulator: Yes Working Hours: 10300 more
15

6 colour KBA (Koenig & Bauer) KBA (Koenig & Bauer) Rapida 105-6+LTTLV CX ALV2 UV

Schijndel, NetherlandsNetherlands dealership location
18115 km
2001
ready for operation (used)
Colortronic, Ergotronic console, CX package, Non-Stop feeder , Suction feeder table, Anti static device, Steel plate in feeder, Number of printing unit(s): 6, Straight machine, SAPC semi automatic plate change, Varidamp dampening, Automatic inking roller washing device, Automatic blanket washing device, Automatic impression cylinder washing device, Dampening system: Technotrans Beta.C , Ink temperature control, Number of coating units: 2, UV coating, Water base coating: chambered ductor system, ... more
4

Telehandler JCB 540-140 HI VIZ

Dormagen, GermanyGermany
18065 km
2016
excellent (used)
2016 JCB 540-140 HI VIZ Turbo Powershift Telehandler c/w Sway, Bucket, WLI 2ri9ui This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, DE on 4th – 6th September at 8.00am CET. To view full inventory go online. more
8
Krauss- Maffei KM 50/180 CX + Robot Year of production: 2007 TECHNICAL DATA Screw Dia [mm]: 30 Shot Weight [g]: 77,4 Injection Pressure [bar]: 2025 Clamping Force [kN]: 500 Tie Bar Distance [mm]: 370 x 370 Platen Size [mm]: 620 x 620 Mould Height min. [mm]: 200 CONTROL Type of Controls: MC5 Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 19 Workinghours [h]: 54702 Dimensions [m]: 2,6 x 1,25 x 1,9 Weight [kg]: 30... more
6

Telescopic arm stacker JCB 541-70 4WD 20Km/h

Friedrichsdorf, GermanyGermany dealership location
17989 km
2010
used
Vehicle data -Brand: JCB -Type: 541-70 4WD 20 km / h -Drive type: diesel -Capacity: 4100kg -Load emphasis: -Height: 7000 mm -Range: 0 mm -Year of construction: 2010 -Operating hours: 1630 -Internal No.: X 280814 _____ Mast data -Mast type: telescopic -Height: 7000 mm -Height: 2490 mm -Free lift: 0 mm Baogvd -Carriage: 0 mm -Forks: 1200 x 0 x 0 mm _____ ... more
4
approx. 91 million impressions (June 2019), PrinectCenter, WallScreen, InpressControl, Preset Plus Feeder, Preset Plus Delivery, Autoplate, Technotrans CombiStar aircooled, CleanStar Compact, coating unit with chamber ductor blade and varnish supply, blanket-, impression- and ink unit washing device, double sheet control-pulling device, extd. delivery 2 moduls (X2), DryStar Combination IR + HL 3 slide-in aircooled, AirStar Pro compressor aircooled, powder device AP500, antistatic device Compact ... more
13

Injection moulding 301 - 500 ton. KRAUSS MAFFEI KM 420/750-380 CX Z-180 BO V

Cerreto D'Esi, ItalyItaly dealership location
17814 km
2015
ready for operation (used)
Tonnage:420 Ualagf3u Clearence between tie-bars:900 x 800 mm Screw diameter:A: 30 mm B: 25mm C:25 mm Min/Max mould thickness: 380/1020 mm Robot connection Euromap-12:Yes Core pull: 3 Mov. plasten stroke: 1400 mm Air ejection: 1 Akkumulator: Yes more
9
hydraulic controlled industrial panel scissors HGR3013 Bfepmy7fug Cutting capacity 3,000 x 13 mm ST with automatic cutting gap and cutting angle adjustment controlled rear stop 5 - 1,000 mm pneumatic sheet metal holding table with optional storage to the rear or with return-to-transmitter function more
4

Backhoe Loader JCB 4CX

More Jcb 4 Cx
Dormagen, GermanyGermany
18065 km
2016
excellent (used)
2016 JCB 4CX Turbo Powershift Sitemaster Backhoe Loader, Piped c/w SRS,Torque Lock, A/C, Extendahoe, 4in1 Bucket, Bucket, Forks (Copy of Declaration of Conformity Available) Bfgkrhhssu This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, DE on 4th – 6th September at 8.00am CET. To view full inventory go online. more
7

Stamping and punching machine EUROMAC CX 1000/30 CNC

Brno - Slatina , Czech RepublicCzech Republic
17472 km
2001
excellent (used)
Stamping and punching machine CX 1000/30 CNC Producer: EUROMAC YP: 2001 Working surface ... 2250x1400mm Nn38h Nominal press force ... 30t Axis X ... 1250mm Y axis ... 1000mm Max. Workpiece weight ... 100kg The machine is in good condition, possible to test under power. more
6
KBA Rapida 105-4 LV CX used offset printing press 4 colours with coater and extended delivery Etbql07 special maximum papersize: 74×105 cm, CX: cardboard version, coater, Technotrans beta.v., chamber blade system, anilox roller, extenede delivery ALV2, Eltosch infra red/hot air dryer, ErgoTronic, ColorTronic, PWHA, preset, Varidamp, Technotrans beta c., inktemperature control, Techontrans beta z., all automatic washup devices, Kersten antistatics, ion blowers, non stop feeder, non stop deli... more
5
Vacon Vaasa Control Oy Frequency converter 2.2kW 1.5CXL4G510 A frequency converter is a power converter which generates a variable frequency and amplitude alternating voltage from alternating voltage for the direct supply of electrical machines such as three-phase motors. Setpoints for frequency and amplitude of the AC output voltage depend on the requirements of the electrical machine and its current load. Some frequency inverters have additional sensor inputs to detect state parameters of th... more
5

Punching press EUROMAC CX 1000/30

Brno, Czech RepublicCzech Republic
17477 km
2000
good (used)
Travel distances: X: 2000 mm Y: 1000 mm Cutting force: 30 t Stroke: 60 mm Sheet thickness: 6 mm Throat depth: 1000 mm Working speed: 200 strokes / min Engine power: 4 kW Machine dimensions: 4000 x 2800 x 1800 mm Begoiy7m2g Machine's weight about: 5250 kg Accessories: Operation manual PC with pre-installed FabriWIN software for punching programs (supports DXF) Extensive range of punches and dies square - rectangular and circular profiles with more diameters more
5
JCB 8010, 2003 New bushings, new pins. Djklxhj Digging depth up to 2m. Variable chain width 700 - 1000mm (will enter through the door to dig a trench or break an old floor in a room). Net weight 1050kg, easy to transport by bus. Very economical. Optional spout. more
4

Telehandler JCB 535-140 HI VIZ

Leeds, United KingdomUnited Kingdom
18296 km
2016
excellent (used)
11-16 JCB 535-140 HI VIZ Turbo Powershift Telehandler c/w Reverse Camera, Sway, WLI, A/C, Forks - Choice Bvs8keh0 This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 28th – 30th August. For more information go online. more
8
Commission 65111-39 Capacity 0 kg Drive type diesel Mast type lifting height 0 mm Height 0 mm Fzzik3x Free hub 0 mm Forks 0 mm technically very good visually very good Bereifung_vorne rear tyres optional working light rear working lights front heater, STVZO approval, full cabin more
10
x-travel 1.200 mm y-travel 600 mm z-travel 600 mm Control 840D ShopMill Siemens Main spindle: Max. rpm 8.000 min/-1 power capacity - main spindel 15 kW tool taper SK 40 work table: Be8cayuftc table surface area 1.400 x 550 mm number of T-slots 5 Tool-Presetter: number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 100 mm max. tool length 300 mm max. tool weight 12,0 kg change time 3,0 sec feeds: rapid traverse ( X / Y / Z ) 24 m/min feed speeds max. 24.000 mm/min total... more
5
DANFOSS VLT HVAC Frequency Inverter The VLT® HVAC Drive from Danfoss has a variety of features designed specifically to meet the diverse needs of the HVAC business. All models are easy to use and follow the same basic design and operating principle. Once you know one, you know them all. It is the perfect complement for pumps, fans and compressors in modern buildings equipped with increasingly sophisticated solutions. Bffhwki2zx More articles - new and used - can be found in our shop! Inter... more
1
- Rotational head Bdl7i9km0o - tooling included - Machine is ready to go more
1

OFSETTDRUCK CARTON MACHINE KBA RA105-5+L CX ALV2 SAPC

Luzern, SwitzerlandSwitzerland dealership location
18133 km
2013
excellent (used)
s in stock KBA owned very good condition 2013 RA105-5+L CX ALV2 SAPC Cardboard package CX Semiautomatic Plate change SAPC Non-Stop feeder and delivery KERSTEN antistatic All three washing systems BALDWIN Inking unit temperature control IR Dryer KBA VariDry H&B coating unit Bfbhfjvpwo Extended delivery 2400mm ALV2 Ergotronic Color Control Ergotronic LAB Ergotronic ACR automatic register control PowderMax with anti static equipment Printed 78.000.000 more
4

Telehandler JCB 540-170

Leeds, United KingdomUnited Kingdom
18296 km
2015
excellent (used)
12-15 JCB 540-170 Turbo Powershift Telehandler c/w Joystick Controls, Sway, Side Shift, WLI, Forks - Choice Ptz0py This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 28th – 30th August. For more information go online. more
1
TECHNICAL CHARACTERISTICS Maximal strip width: 100 mm Maximal strip thickness: 1,8 mm Stroke: 0-100 mm Working pressure: 5-8 bar Controlled by: electrical valve Cycles per min: 170 Pressure of fixed clamps: 70 kg Pressure of mobile clamps: 158 kg Traction force: 41 kg Air consumption: 87 l/min Weight: 8,8 kg Electrical valve: 24 V DC Feeder made in accordance with EU safety standards. CE certificate and declaration of conformity. Bez3yllpp7 Warranty: 6 months or 1000 working ho... more
15
JCB 8018 CTS-Operating Weight: 1822 kg, transport weight: 1747 kg, sliding chassis, total hydraulic efficiency: 43.6 l/min, torsional arm, hydraulic connection on ARM, Engine: PERKINS ENGLAND, engine power: 14.7 kw/2200 rpm 19KM, Rubber tracks, maximum digging depth (abandoned blade)-2836 mm, maximum digging depth (raised blade)-2442 mm, maximum digging radius 4222 mm; Maximum dumping height 2692 mm, max arm copy Force 8.3 kN; Maximum bucket copy force 16.2 kN; Blade width 1000/1362 mm, blade he... more
9
Krauss Maffei KM 65-380 CX Year: 2015 Control unit: Screw diameter: 28 mm Injection pressure: 2325 bar Injection volume: 74 cm3 Clamping force: 650 kN Platen size: 670 x 670 mm Distance between tie bars: 420 x 420 mm Mould height(min.): 250 mm Opening storke: 500 mm Max. daylight: 750 mm Munr7s Ejector stroke: 150 mm Weight: 3700 kg Equipment: -robot WITTMANN W818T, 2015 year -belt conveyor VIRGINIO NASTRI PNL 3, 2014 year more
1
Bdl7ivzhgn with MultiTool 2 plate clamps more
15
Producer: JCB Model: type 4CX-4WS Production year: 2011 Engine power: 74.2 kW at 2200 rpm Engine complete with accessories, without The engine operation in the full speed range does not raise any objections. W3fg2oxx Own weight: 8,435 kg Equipment: radio Cabin - heated, air-conditioned Additional hydraulic outputs, eg for a hydraulic hammer multifunctional front bucket digging back bucket 4 controlled wheels rear telescopic arm Basic accessories - complete Hydraulic systems (pump... more
4

Excavator JCB 85Z-1

Leeds, United KingdomUnited Kingdom
18296 km
2015
excellent (used)
14-15 JCB 85Z-1 Rubber Tracks, Blade, Offset, CV, QH, Piped - Choice Bfewixa7ti This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 28th – 30th August. For more information go online. more
12
Excavator loader JCB Mini CX, built 2006, 2333 operating hours, shovel, 45 spoon, 3 cylinder Perkins diesel engine 16.8 kw, side hydraulic support Be7omhumnf more
1
with div. defects Nnaqh more on request more
6
Krauss Maffei KM 110-380 CX Year: 2015 Control unit: Bfahzr7lng Screw diameter: 35 mm Injection pressure: 2429 bar Injection volume: 154 cm3 Clamping force: 1100 kN Platen size: 745 x 770 mm Distance between tie bars: 470 x 470 mm Mould height(min.): 300 mm Opening storke: 600 mm Max. daylight: 900 mm Ejector stroke: 150 mm Weight: 3700 kg Equipment: -robot WITTMANN W818T, 2015 year -belt conveyor VIRGINIO NASTRI PNL 3, 2014 year more
1
equipped with 2 gascuttingheads (can be exchanged with plasma NCE 910 control) Iwfpw3n table exists of 2 units 1500 x 1500 mm (with suction) Raillenght: 4000 mm gt; cutting cap with argon/helium: 40 mm gt; cutting cap with oxygene: 25 mm more
9
Type of technical means: Injection with robot and belt conveyor Model: KRAUSS MAFFEI KM 110-380 CX Iwfuxbn Producer: KraussMaffei Technologies GmbH Production year: 2015 Form clamping force: 1100 kN Opening force of the mold: 70 kN Dimensions of the mounting plate: 745x770 mm Clearance between the columns: 470x470 mm Diameter of the screw: 35 mm Ratio Ls / D 22.9 Injection pressure: 2429 bar Injection volume: 154 cm3 Equipment: -Robot with the WITTMANN W818T vertical telescopic axi... more
4

Excavator JCB JS130LC

More Jcb Js 130
Leeds, United KingdomUnited Kingdom
18296 km
2014
excellent (used)
10-14 JCB JS130LC 700mm Pads, VG, CV, QH, Piped c/w Reverse Camera, A/C - Choice Yr7bz0 This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 28th – 30th August. For more information go online. more
5
Beqe22kxfm Printect INPRESS control, WALLSCREEN, Autoplate Pro, WashStar, CombiStar, CleanStar, DryStar PowderStar AP500, Preset plus Delivery X 2, available in 01/2020 more
12
Still CX-S16 Drive: Electric Built: 2012 Cfr7u2r Engine hours: 4206 Capacity: 2000 kg Tine length: 2400 mm Lifting height: 775 mm Battery from 31/2015 The scissor truck is technically and visually in good condition. The scissor truck is immediately ready for use, can be inspected and tested at any time. Prior inspection possible at any time and desired. Cash payment upon collection. Commissanic anedo can be packed on pallet. Shipping must be organized by buyers! Please also... more
1

Grinding Unit WEMA GLAUCHAU SI3-CNCx150

Korschenbroich, GermanyGermany dealership location
18074 km
1998
used
Control Siemens Sinumerik profile internal dia. to grind 265 mm swing diameter 300 mm grinding depth 150 mm number of spindle speeds 5 - 1.890 U/min spindle head DIN 55026 A5 max. passage 55,5 mm stroke of the table 250 mm/z-Achse rapid traverse 20 m/min/z-Achse weight of the machine ca. 4,3 t Be7yfoyfka more
9
JCB 3 CX TURBO-vintage: 2015r; ~ 3400 mth; Weight: 8135 kg; 4WD Torque Lock (saves up to 25% of fuel when driving fast), automatic transmission (PowerShift) for driving at speeds up to 41.8 km/h; Shake reduction SmoothRideSystem SRS (floating spoon); Hydraulic system performance Adjustment (ECO/LO) HSC, Slnik: Turbo Diesel engine power (2200 rpm): 68.6 kW/92 HP. EXCAVATOR: Telescopic copy arm, hydraulic connection on ARM; Maximum digging Depth-4.24/5.46 m, maximum digging radius 6.52 m; Maximum ... more
7
-1 piece: TS Motor Pump -For more information and visual condition, see photos -needed, good condition -functional Details: Nmu7j -Fine Sinter -Model TS-CX400TMT -22R-G351 Shipping on request. We ship daily with DHL, general cargo (with loading board wall) and forwarding company. All information about your purchase can be requested during our business hours from Mo.-Thu. from 07am 30 to 16:30 and Fri. from 07:30 to 14:00. Notes on how to buy our items: We would like to point o... more
4

Excavator Case CX145CSR

Leeds, United KingdomUnited Kingdom
18296 km
2015
excellent (used)
13-15 Case CX145CSR 700mm Pads, VG, CV, QH, Piped c/w Reverse & Blind Spot Camera, A/C - Choice Yqzldazk This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 28th – 30th August. For more information go online. more
13
Machine type: CNC HORIZONTAL LATHE Make: JOHNFORD Type: ST-100 CX-CF CNC: FANUC 21i-TB Year: 2007 - December -- AROUND 3600 Hours WORKING TECHNICAL DETAILS Swing diameter over bed 1 199 mm Turning diameter over carriage 1 001 mm Distance between center 2 388 mm Nmnnj Bar capacity 152 mm X axis travel 521 mm Z axis travel 2 400 mm Spindle speed... more


jcb 1 cx
daily

New machines via email!

Stay updated!

to

to

Edit search
JCB 1 CX
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.