Vertical machining center

FADAL VMC 2216FX

Condition: used, Year of construction: 2007, Operating hours: 7,669 h Technical Specifications: Travel X/Y/Z: 500 / 400 / 500 mm Distance column-spindle: 400 mm Pedpfxow D Dgij Adnord Distance spindle nose-table: 102 - 610 mm Distance floor-table: 787 mm Table size: 990 x 400 mm Ball screw diameter: 32 mm, double-supported Rapid traverse: 25.4 m/min Max. feed rate in X/Y/Z: 20 m/min Spindle speed: 10 - 8,000 rpm Spindle power: 11 kW (S1-100%), 16.5 kW (S6-40%) Tool holder: SK 40 Tool stations: 21 Max. tool diameter: 76 mm (up to 114 mm with free adjacent stations) Max. tool length: 380 mm Max. tool weight: 7 kg Pneumatic connection: 5.5 - 8 bar Weight, approx.: 3,765 kg Equipment: GE Fanuc 0i-MC Control: - Standard CNC controller - User-friendly graphical display - Easy operation, programming, and diagnostic capabilities Steinmeyer ETA and double-supported ball screws: - Increased rigidity - Minimal friction Cast iron base with robust box guideways: - Flame-hardened flat guideways - Wide contact surface on guide rails - High vibration damping

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm Podpfxjxddrpe Adnord max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Pedpfswk Nm Isx Adnsrd 10.000 rpm

Year of construction: 1985, condition: used, spindle diameter 110 mm x-travel 900 mm y-travel 600 mm z-axis 200 mm table length 1020 mm table width 860 mm taper MK 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Prjdpot Hwyxofx Adnod Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Year 2017 Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm Podpfjrdg H Hex Adnerd

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, functionality: fully functional, Spindle speed: 50-6000rpm Psdpfx Aowfr R Eednord Movement XA-XB: 205mm ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and Predpfxjwbvhae Adnod machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Prodpev H Dgpjfx Adnsd

Condition: good (used), Year of construction: 2007, Gildemeister lathe NEF 600 year of construction 2007 Heidenhain Plus control Turning diameter max. 600 mm Center distance 1.250 mm Swing diameter over bed 600 mm Cross stroke 320 mm Main spindle: Speed range - main spindle max. 3,000 min/-1 Spindle bore 90 mm Chuck diameter 320 mm Tool turret: Number of tool positions 8 pos. Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: , flushing gun, Schunk lathe chuck 315 mm, Tailstock MK 5 Predpsucl Alofx Adned

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Prsdsrt Ip Nspfx Adnjd Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.