Four rolls bending roll 3000 x 18 mm

FACCIN 4HEP MPE S54

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 Lajdjtycg Sepfx Ap Asb table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and Laodpfx Apouddcas Asb over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Lsdpfx Aov U Ea Hsp Aeab VACAM CNC Control. Short piece removal.

Condition: new, Spiral mixer S 75 Ital Form Mixer dimensions: 1250x810x1410mm Bowl dimensions: 750x440mm Dough capacity: 120kg Flour capacity: 75kg Mixer power: 9kW Bowl power: 1.2kW Laodex U Eigopfx Ap Aeb Voltage: 380V / 50Hz Mixer speed: 123-245rpm Bowl speed: 20rpm Net weight: 376kg

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Ljdpjx Dtt Aofx Ap Aoab Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Lasdpoxl R Hvsfx Ap Aeb Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: used, Year of construction: 2004, Sato cutting machine for sale Laedpfovx N I Nex Ap Aob

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Lodjwykccepfx Ap Ajab

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Lsdpfxjgyy I Ae Ap Aeab Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating telehandler Load center: 600 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 445 65 R22.5 Front tire condition: 80 - 100% Laodpfxexya H Us Ap Aob Rear tire type: Pneumatic Rear tire size: 445 65 R22.5 Rear tire condition: 80 - 100% Third control valve, heating, full cabin, air conditioning, Remote control, work platform pre-installation, free return flow