3 roll plate bender IMCAR - SIHR 12/3

IMCAR SIHR 12/3

Condition: new, Timesavers Series 12 WW Pgjdjwqf U Uspfx Ahysk The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Pgodpfswb Scmsx Ahysk Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 158 h, arm reach: 1,300 mm, Hello, Podpfxop E T N Ao Ahyogk we are selling a demonstration robot UR10e, was used for a concept study but was discarded.

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor Pgjdpfx Ahohturceyok full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster to test under power ! option: warranty, setup, training

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm. Pjdpow Hx Tvsfx Ahyegk

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Pedewyblzspfx Ahyegk Parts shown by hand not come.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach. Pgedpfjpugwiex Ahyok

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 Pgsdpfouhf Tzjx Ahyek converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 Psdpfx Asupg Scohysgk strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009

Condition: new, Bernardo manual metal circular saw CS 315 H Technical specifications Saw blade diameter of 315 x 40 mm Speed 19 / 38 U/min Vice opened Max 150 mm Working height 920 mm S1 motor power output 100% 0,75 / 1,5 kW Motor power S6 40% 1.0 / 2,1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight 235 kg Round solid material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Square shaped tube 90°: 80 x 80 mm 45: 70 x 70 mm Solid material square 90°: 80 x 80 mm 45: 70 x 70 mm Square tube rectangular 90°: 90 x 80 mm 45: 80 x 70 mm Rectangular solid material 90°: 90 x 80 mm 45: 80 x 70 mm Properties Gear head for slot working left and right 90 ° swiveling Removable coolant tank in the robust base integriergt Gearbox with hardened and ground Auger and bronze worm wheel Psdped Id Ugjfx Ahyegk Security guard opens automatically when the cutting Precise, 4 guided, self-centering double clamping vise Ergonomically shaped handle with push button for fatigue-free cutting Low speed of the saw blade (19 / 38 RPM) optimal for cutting of full materials Reduction gear low noise running in an oil bath Scope of delivery Coolant system with filter Self centering Vice Base