Hydraulic Press

Exner EEX 80 ZR

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Immediately available, 12-month warranty -Max. temperature: 180°C -External dimensions (W x D x H): 2520 x 1870 x 2300 mm Cedpfjxfvfkox Ac Njpu -Usable chamber (W x D x H): 1700 x 1350 x 1660 mm -Siemens Simatic Touch Panel -Connection: 400V / 50Hz -Power consumption: 21 kW -Exhaust air volume: 2 m³/min -Weight: 1,100 kg -Documentation included Not a paint drying oven according to DIN EN 1539! Inspection in our warehouse possible by appointment. Oven, ovens, drying oven, kiln, heating oven, thermal cabinet, industrial oven, tempering oven, pre-heating oven, heat treatment oven, drying cabinet, chamber oven, recirculating drying cabinet, recirculating oven.

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Cedjdzqddepfx Ac Njpu Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: used, Zwick / Roell Type: LTM10 Max test frequency: 100 Hz depending on the amplitude Dynamic test force in tension/compression: 10 kN Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test chamber height without force transducer: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance specifications, partly by Zwick/Roell Accessories: screw clamps, software (TestXpert research) Connection 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (see picture) Cpsdpfx Acsv Ifgtj Nsu (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t Codsvuufxepfx Ac Nepu stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 3,550 mm, table height: 1,200 mm, total width: 2,260 mm, pressing force: 80 t, table width: 2,100 mm, table length: 840 mm, overall weight: 12,000 kg, EXNER PG 80 Tool Test Press Year of manufacture: 2015 Number of press cylinders: 2 Nominal force (adjustable) 2 x 400 kN Retraction force 2 x 150 kN Ram stroke 350 mm Ram width: 2100 mm Ram depth: 840 mm Installation height: 550 mm Table width: 2100 mm Cedpfsv U T R Tox Ac Nspu Table depth: 840 mm Table clearance 1300 x 125 mm Front column clearance 1700 mm Side column clearance 600 mm Table height above floor 1200 mm Ram speed at load up to 100% approx. 0-10 mm/s Ram return speed approx. 0-20 mm/s - Electronic roller feed unit EV 22 AK included Belt width: max. 220 mm Belt cross-section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: max. 120 m/min Roller opening: max. 4 mm Accuracy: +/- 0.05 mm Roller diameter: 38.2 mm The system is equipped with a Zehnder Sommer feeder. This is mounted on the left side and can be moved backwards from the side area. Appropriate safety devices for automatic continuous operation are provided.

Condition: refurbished (used), Year of construction: 1971, functionality: not functional, machine/vehicle number: 7/2118, total height: 4,800 mm, table height: 950 mm, installation height: 800 mm, total width: 2,500 mm, total length: 1,800 mm, pressing force: 100 t, table width: 1,000 mm, table length: 870 mm, operating speed: 400 mm/s, overall weight: 10,800 kg, reverse speed: 300 mm/s, ram plate width: 1,000 mm, ram plate length: 870 mm, distance table to ram: 800 mm, type of input current: three-phase, stroke length: 500 mm, oil tank capacity: 800 l, input voltage: 400 V, pressing speed: 50 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Cedpfsxyxriox Ac Njpu

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 800 mm, table length: 800 mm, clearance between the columns: 800 mm, retraction force: 40 t, stroke length: 600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial press solution designed for metal forming, deep drawing, and precision pressing applications, featuring a rigid four-column body construction. The St52 grade steel frame is stress-relieved via vibration methods, ensuring long-term retention of high parallelism and squareness tolerances. The ram and bolster systems operate independently, with stroke and pressure settings precisely controlled via a touchscreen interface. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled systems, it provides high efficiency, reliability, and extended service life. The automatic lubrication system and electronic filter contamination alerts keep maintenance requirements to a minimum. This model is the ideal solution for medium-scale mass production, die testing, and precision forming applications. Key Advantages Cpjdox N Ulyspfx Ac Nju - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and bolster - Full control via touchscreen panel - High precision and repeatability - Low maintenance costs, long service life Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (BOLSTER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m SQUARENESS TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (BOLSTER): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELDING STRESS RELIEF: Vibration stress relieving WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s BOLSTER TABLE ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 230 mm – Ck45 BOLSTER CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3,500 mm APPROX. PRESS WIDTH: 1,150 mm APPROX. PRESS DEPTH: 1,150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1,200 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / BOLSTER STROKE AND TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 7.5 Ton Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.