WIRE ELECTRO-EROSION
EXCETEK V1280/600

Name: EXCETEK V1280/600
Brand: EXCETEK
Availability: InStock

Year of construction

2018

Condition

Used

Location

Borgo San Dalmazzo Italy

Show map

Machine data

Machine type:: WIRE ELECTRO-EROSION

Manufacturer:: EXCETEK

Model:: V1280/600

Year of construction:: 2018

Condition:: like new (used)

Functionality:: fully functional

Price & Location

Location:: Via Vecchia Di Cuneo 51/A, 12011 Borgo San Dalmazzo, Italia

Call

Details about the offer

Listing ID:: A20523010

Update:: 13.11.2025

Description

Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm
Maximum workpiece weight: 4,000 kg
X and Y axis travel: 1,200 x 800 mm
Fodpfx Afexwmacjnjpb
U and V axis travel: 260 x 260 mm
Z axis travel: 600 mm
Permissible wire diameter: 0.2 – 0.3 mm
Simultaneous controllable axes: 4 (X, Y, U, V)
Motors: AC motors on all 5 axes
Maximum taper: 30° over 100 mm
Machine weight: 9,600 kg
Filtration system
Capacity: 3,000 L
Conductivity control: automatic
Resin capacity: 14 L
Temperature control: automatic
Dielectric cooling system: chiller
Generator
Power circuits: Mosfet AC
Minimum roughness: Ra 0.35
Cutting speed: 360 mm²/min (with 0.3 mm brass wire)
Automatic wire threading: standard
Power supply: 400V three-phase
CNC
Hardware: Industrial PC, 64 bit
Memory: 1 GB
Display: 15” TFT touchscreen
Data input: keyboard, RS 232, floppy, LAN, USB
Positioning system: closed-loop servo-assisted
Number of controlled axes: 5 (X, Y, U, V, Z)
Minimum programmable increment: 0.0001 mm
Machine equipped with:
• Optical scales on X and Y axes
• 600 mm Z axis
• Coil holder for up to 50 kg spools
• 1 set of 0.25 mm guides
• 1 set of 0.30 mm guides
• Taper cutting system
• Automatic wire threading and re-threading after breakage
• Clamping system: frame with universal drilling
• 64-bit CNC with 16 GB memory
• AC power generator with anti-electrolysis device
• Automatic technology generation
• Serial interface, floppy drive, LAN, USB
• Dielectric unit with automatic demineralization system
• Chiller
Year of manufacture: 2018

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

25 listings online

Call

Send inquiry

Telephone & Fax

+39 0171 ... show

These listings may also fit your interest.

Listing

Machining Center - Vertical Haas VF 3 YT/ 50

Bremen

18,325 km

Machining Center - Vertical
HaasVF 3 YT/ 50

Call

Condition: used, Year of construction: 2011, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter Fpodpfx Afjwvl Apensb

See details

Listing

CNC Turning- and Milling Center WFL-MILLTURN M100 MILLTURN / 6500

Hilden

18,565 km

CNC Turning- and Milling Center
WFL-MILLTURNM100 MILLTURN / 6500

Call

Condition: used, Year of construction: 2010, longitudinal traverse (z-axis) 6870 mm cross movement. (x-axis) 920 mm Fjdpfsxzuvtox Afnopb centre distance 6500 mm swing diameter over slide rest 900 mm Control Siemens Sinumerik 840D tool taper CAPTO C8 7352 mm max. workpiece weight 9000 kg tools in tool magazin 72 total power requirement 145 kW weight of the machine ca. 47 t dimensions of the machine ca. 11 x 3,2 x 3,5 m Rotary spindle -Spindle diameter - 320 mm -Spindle bore - 245 mm Main drive: -Max. spindle speed - 1600 rpm -Max. torque at the spindle - 4472 Nm C-axis servo-controlled main spindle: -Max. speed - 20 rpm -Max. torque at the spindle - 3000 Nm -Holding torque of the disc brake - 6000 Nm Tailstock: -Quill diameter - 180 mm -Quill stroke - 200 mm -Quill force (adjustable) - 5400 to 40000 N Tool holder: -AC drive power - 30 kW -Max. spindle speed - 6000 rpm -Max. torque at the spindle - 315 Nm -Travel perpendicular to the X/Z plane (y-axis) - 500 mm [-200/+300]mm -Milling spindle diameter in the front bearing - 100 mm Equipment/accessories: -with internal coolant supply -chip conveyor -paper belt filter system -boring bar with device -measuring equipment -clamping sleeves -tool holders -spare parts -technical documentation

See details

Listing

Coordinate measuring machine KEYENCE WM 3000

Mögglingen

18,561 km

Coordinate measuring machine
KEYENCEWM 3000

Call

Condition: excellent (used), Year of construction: 2023, Mobile 3D coordinate measuring machine Camera, hand probe with display Max. Measuring length 10000/3500/3500 mm Certified measuring range 3000/1500/1500 mm Triple camera Integrated measuring probe camera Fpjdju S Rnlspfx Afnob Measuring accuracy ±(28 + 5 L/1000) μm* Repeatability ±10 μm* Accessories

See details

Listing

Vertical machining center MIKRON VCE 1000 pro

Root

18,756 km

Vertical machining center
MIKRONVCE 1000 pro

Call

Listing

Székesfehérvár

18,032 km

Machining center
MatsuuraLV-500

Call

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 Fpodpfxovcfi De Afneb High speed and high accuracy option on Fanuc. The Machine can be inspected under power.

See details

Listing

Screw Compressor CHICAGO PNEUMATIC CPVR15 + Lufttrockner

Ennepetal

18,536 km

Screw Compressor
CHICAGO PNEUMATICCPVR15 + Lufttrockner

Call

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Fpsdpfxsh A Sfds Afnjb Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

See details

Listing

Ada

17,933 km

CNC lathe
RAVENSBURGKL-2500-6000 CNC

Call

Condition: good (used), Year of construction: 1988, Description: Heavy-duty, high-precision horizontal lathe with Rohm hydraulic clamping system, slide with two working positions, Sauter 4-position tool turret, circular turning unit, CNC 6 axes, tailstock, chip conveyor. Suitable for both high-volume material removal and high-precision turning. Machine modified with a 2000 mm face clamping plate and increased in size. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers: 2200 mm Turning diameter over slide: 1400 mm Turning length: 6000 mm Three-jaw chuck table: 2000 mm Spindle bore: 200 mm Attachment for circular turning Workpiece weight: 4,500–40,000 kg Turret head: 4 positions Spindle speed range: 4 – 400 rpm Main motor Siemens 95.5 kW Maximum torque: 40,000 Nm Overall power requirement: 125 kW Control: CNC SIEMENS 8T, 6 controlled axes Machine weight: 43,000 kg Required space: 13,000 x 4,000 mm Fpodpfx Asxmb Adofneb

See details

Listing

Wire erosion machine (wire EDM) CHARMILLES Robofil 440

Bienne

18,826 km

Wire erosion machine (wire EDM)
CHARMILLESRobofil 440

Call

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Fedew Ucyuopfx Afnspb Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

See details

Listing

CNC turn-mill center Niles N 40 MC - 6000

Biebrich

18,581 km

CNC turn-mill center
NilesN 40 MC - 6000

Call

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 turning-milling center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y-axis -200 / +400 mm, B-axis 0.001°, B-axis swivel range -105° / +95°, tool changer with 192 positions, C-axis main spindle 0.001°, spindle speed up to 1,750 rpm, 2 gearbox stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Fpjdsw T Ag Espfx Afneb

See details

Listing

5-axis milling machine RödersTec RXP500DSC

Soltau

18,283 km

5-axis milling machine
RödersTecRXP500DSC

Call

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. Travels: X450mm, Y400mm, Z240mm Spindle / table distance: approx. 315mm - Linear direct drives in all axes - wear-free Specification: - Tool changer places: 19 - Cooling unit for drives, motors, spindle and cable cabinet - Measuring laser for the fully automatic measuring of milling tools (length / diameter / contour / cone angle) as well as wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimal quantity lubrication - emulsion cooling - Spindle HSK40E with max. 42.000 rpm - Spindle compensation Fedpfx Ajtt Argofnopb - Zero point clamping system Erowa integrated in the machine table - manual operating of chuck clamping - Automation package for retrofitting the machine with a pallet changer - Handbox The machine is overhauled in our house and is now in almost new condition. The machine can be inspected and tested under power after completion at our site. Please make an appointment with us!

See details

Advertise here

WIRE ELECTRO-EROSIONEXCETEK V1280/600

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

WIRE ELECTRO-EROSION
EXCETEK V1280/600