Used Engel Duo 5550/1100 for sale (3,979)

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Njdpjw U Taxjfx Ab Aodc Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Njdpew U Sz Iofx Ab Aedc Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: Nedpez Nkavjfx Ab Asdc - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Nedpfx Asyw Aa Ueb Aodc Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, clamping force: 6,500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Nodey Ug Ahspfx Ab Asdc Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits RC 200 integrated with C30 E handheld control unit

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, machine/vehicle number: 180299, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! Ndodpoy T Hfyjfx Ab Asc TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (Unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing rate: 77 g/s Nozzle pressure force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 pieces (mounted on the fixed platen)

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar Njdpfx Aeyuc Ureb Asdc • Ejection force: 215 N • Opening stroke: 1800 mm • Heating capacity: 113 kW (153.64 hp)

Condition: ready for operation (used), Year of construction: 2003, clamping force: 8,000 kN, screw diameter: 90 mm, total width: 3,000 mm, total height: 2,500 mm, overall weight: 44,000 kg, product length (max.): 8,900 mm, Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details. • Shot volume: ~2700 cm³ Njdpfx Abey Alwmj Asdc • Max. injection pressure: ~1900 bar • Plasticizing capacity: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle), larger mold space for easier changes, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticizing; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large parts, more compact than traditional tie-bar machines, stable industrial design, easy to automate Additional equipment • Not specified/included in the provided information

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Nodpfx Abszqdagj Ajdc Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,250 h, functionality: fully functional, machine/vehicle number: 51760, clamping force: 11,000 kN, screw diameter: 90 mm, injection pressure: 1,910 bar, tool height: 1,270 mm, TECHNICAL DETAILS Clamping force: 11,000 kN Platen size (H x V): 2,340 x 2,040 mm Tie bar spacing (H x V): 1,575 x 1,320 mm Njdpjxuqbrsfx Ab Aodc Min. tool height: 592 mm Max. tool height: 1,270 mm Max. opening stroke: 3,016 mm Injection unit Screw diameter: 90 mm Shot volume: 2,480 cm³ Shot weight (PS): 2,256.8 g Injection pressure: 1,910 bar MACHINE DETAILS Net weight (including control cabinet): 62 + 11 t Operating hours: 70,250 h EQUIPMENT ENGEL ERC 84-1E robot

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Ndedex Up Rnepfx Ab Ajc Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: excellent (used), Year of construction: 2024, ENGEL DUO 36060/2700 TECH INJECTION MOLDING MACHINE Year of manufacture: 2024 Clamping force: 27,000 kN (2700 tons) Robot: ENGEL VIPER 90 CLAMPING UNIT Clamping force: 27,000 kN Ndedpez N Et Defx Ab Asc Mold opening stroke: 3300 mm Maximum mold opening distance: 4100 mm Minimum mold height: 800 mm Maximum mold height: 2200 mm Column spacing (H × V): 2180 × 1750 mm Platen dimensions (H × V): 2970 × 2640 mm Opening force: 770 kN Opening force with hydraulic cushion: 1600 kN Dry cycle time (EUROMAP 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Injection volume: 24,100 cm³ Theoretical injection weight (PS): approx. 21.9 kg Injection rate: 2620 cm³/s Injection pressure (regenerative mode): 1300 bar Maximum injection pressure: 1600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Torque at maximum speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s INJECTION NOZZLE Nozzle stroke: 1300 mm Nozzle closing force: 210 kN EJECTION SYSTEM Ejector stroke: 400 mm Ejector forward force: 420 kN Ejector return force: 420 kN HEATING SYSTEM Number of heating zones (including nozzle): 12 Installed heating power: 160.9 kW DRIVE AND HYDRAULIC SYSTEM Installed motor power: 355 kW Motor power for charging pump: 3 kW Hydraulic oil tank capacity: 3500 l COOLING SYSTEM Required cooling capacity: 66.9 kW Water consumption (supply temperature 32°C): 5.88 m³/h ADDITIONAL EQUIPMENT Linear robot: ENGEL VIPER 90 Movable / pull-out guide column Hot runner control: 160 zones Hydraulic core control: 3 + 3 Cascade control: 72 channels

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm Njdpfx Aozvwl Tjb Aodc • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Ndedpjycc N Sefx Ab Aec Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters Nedpjy Tuhiofx Ab Ajdc - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Ndodpjz Az Iajfx Ab Aec Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Ndodpfx Asz Rplyjb Ajc Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication Ndjdpfx Abszxy Szo Aec • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 Ndjdpfx Ajx Nr R Heb Aoc • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: good (used), - Used machine - Passage width: 1100 mm - Passage height: 3 - 160 mm - 1st unit: Contact roller - 2nd unit: Grinding shoe - Grinding belts: 1120x1900 mm - Motor power: 15.0 kW Ndedpfoz Tflnex Ab Asc - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm - Weight: 2500 kg - Ex works

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Nedpfszkatcsx Ab Asdc Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h Nodpfx Absx Nr Rye Aodc • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of Hydraulic Cores (FS/MS): 1 fixed side and 2 moving side • Number of Hydraulic Cascades: 0 • Number of Hot Runner Control Points: 8 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Nedpozvc N Refx Ab Ajdc Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: ready for operation (used), Year of construction: 2018, operating hours: 54,823 h, clamping force: 7,000 kN, screw diameter: 80 mm, injection weight: 1,916 g, total width: 2,780 mm, total height: 2,320 mm, overall weight: 20,000 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,200 mm, Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details. • Operating hours: 54,823 h • Clamping unit: • Platen dimensions: 1,510 x 1,440 mm • Distance between tie bars: 1,000 x 960 mm • Min. mould height: 450 mm • Max. mould height: 950 mm • Max. opening width: 1,850 mm • Injection unit: • Injection unit size: 5160 • Shot volume: 2,061 cm³ Ndsdpfxez Az Ers Ab Ajc • Max. injection pressure: 2,300 bar • Electrical and hydraulic: • Hydraulic pump motor power: 109 kW • Heating power: 40.7 kW

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Ndsdpfx Abox Nr Uxs Ajc Additional equipment • Robot (equipped)