Injection molding machine

Engel 1560/300 victory 300

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Ncodpfx Ahow Az Riovep

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 Nodpfxoinzdlj Ahvjcp High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm Nsdpfxowbi Hpe Ahvjcp spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Ncedpfsr A Eifsx Ahvsp

Year of construction: 2003, condition: used, pressure 100 t stroke 10-130 mm no. of strokes 30-90 Hub/min throat 330 mm Ncedpfx Aera Rr Eohvop ram - range of adjustment 100 mm table surface area 950x660 mm ram surface 540x440 mm hole in the table Ø 230 mm table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 7 t

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table length: 1,600 mm, table width: 700 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Ncjdpfx Ahsrkn Iiovep Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Ncjdpfxstvnlbo Ahvjp Control cabinet color RAL 7035 light grey

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: M2019011975, cooling capacity: 430 kW (584.64 HP), Carrier Chiller 30 RBP-430-0095-PE (AquaSnap Series) Type: Air-Cooled Liquid Chiller Model: 30RBP-430-0095-PE Variant: 30RBM/RBP Serial Number: M2019011975 Year of Manufacture & Test: 06/2019 Manufacturer: Carrier SCS, Montluel, France (United Technologies, Carrier Corporation, USA) Technical Specifications: Nominal Cooling Capacity: 430 kW Refrigerant: R-410A Circuit A: 23.50 kg / Circuit B: 26.70 kg Total Charge: 50.2 kg GWP: 2088 Compressors: Danfoss Scroll SH240A4ACE (thermally protected) Power Supply: 400 V / 3 Ph / 50 Hz Maximum Current Draw: 340 A Maximum Starting Current: 210 A Power Input: 210 kW Operating Temperature Range: –20 °C to +52 °C Net Weight: 2760 kg Protection Rating: IP54 Pressure Data Refrigerant: R-410A Allowable Pressure (Min/Max): High side (PS): –1.0 / 44.2 bar (–99.0 / 4420.0 kPa) Low side (PS): –1.0 / 31.1 bar (–99.0 / 3110.0 kPa) Safety Relief Valve Setting: 42 bar Rupture Disc Setting: 45 bar Test Pressure: 15.0 bar (unit leak test) Additional Information: Air-cooled design with axial fans and integrated condensers. Electrical control panel with Carrier management system. Hermetically sealed system, original Carrier service log included. Nodpoxb D Raofx Ahvecp Serviced and maintained by official Carrier service centre.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: PNG2 4302HEX - 2200399999, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,974 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 84 m³/h, pump pressure: 1.8 bar, total width: 2,191 mm, total length: 4,449 mm, total height: 2,536 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled Chiller Unit, Type: Phönix PNG2 4302 HEX (R513A) Manufacturer: MTA S.p.A. The Phönix PNG2 4302 HEX series are compact water chiller units designed for outdoor installation. Features include: - Shell-and-tube evaporator - Electronic expansion valves - Compressor shut-off valves - System with compressors and hydraulic sound insulation panels - Ambient operating temperature down to -20 °C - Buffer tank and twin P2 pump Njdpfewzay Tjx Ahvjcp - Metal mesh protection filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 84 Available pump head (bar): 1.8 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R513A, GWP 631, safety class A1 Number of refrigeration circuits: 2 Number of compressors: 2 Capacity control (%): Variable from 12.5 to 100% Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Maximum power input (kW): 235 Maximum current (A): 385 Starting current per circuit (A): 467 Protection rating: IP54 Dimensions: Length (mm): 4449, Width (mm): 2191, Height (mm): 2536 Weight (kg): 4974 Connection: Victaulic DN 125 Serial No.: 2200399999 Year of manufacture: 2023 Condition: Visual: 2, Technical: ok & tested Used Price: on request in Euro (plus VAT, ex Nettetal) – 3 months warranty On request, MTA offers a functional test of the chiller together with the buyer before collection at the Nettetal branch. Used machines may have visual defects due to prior use. (Technical specifications subject to change and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Ncedex Ivy Njpfx Ahvop Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B